Pass the Citrix CCE-N 1Y0-440 Questions and answers with ExamsMirror

Scenario: A Citrix Engineer is asked by management at the workspacelab organization to review their existing Citrix ADC Configurations and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in high-availability pair, and the outbound traffic is load balanced between two internet service providers (ISPs), however, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:

The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.

The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.

Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should not flow through both routers simultaneously.

What should the architect configure with Link Load Balancing LLB) to meet the requirement?

A Citrix Architect needs to define the architect and operational processes required to implement and maintain the production environment.

In which phase of the Citrix Methodology will the architect define this?

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.

Organizational details and requirements are as follows:

Active XenApp and XenDesktop Service subscription

No existing NetScaler deployment

Global Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.

Click the Exhibit button to view the conceptual environment architecture.

The architect should use _____ in Location A, and should use ________ in Location B. (Choose the correct option to complete the sentence.)

Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?

Scenario: A Citrix Architect has executed the following commands on the Citrix ADC:

In which scenario will the timeout work as configured?

Scenario: A Citrix Architect needs to design a new Citrix ADC Gateway deployment to provide secure RDP access to backend Windows machines.

Click the Exhibit button to view additional requirements collected by the architect during the design discussions.

To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a _________ solution. (Choose the correct option to complete the sentence.)

Which two settings must a Citrix Architect enable to deploy a shared VLAN on Citrix ADC VPX instance on an ESX platform? (Choose two.)

Which two options should a Citrix Architect evaluate during a capabilities assessment? (Choose two.)

Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for NetScaler design projects:

All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.

Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.

GSLB should resolve both A and AAA DNS queries.

In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.

When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.

On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.

USIP is configured on the DMZ NetScaler appliances.

The external NetScaler will act default gateway for back-end servers.

All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.

Which design decision must the architect make to meet the design requirements above?

Which two settings should a Citrix Architect use on Citrix Application Delivery Management for configuring CPX using a pre-existing CPX device? (Choose two.)