Pass the CompTIA Server+ SK0-005 Questions and answers with ExamsMirror

 The hosts file is a file that maps hostnames to IP addresses on a server or a computer. It can be used to override or supplement the DNS (Domain Name System) resolution for certain hosts or domains. If the hosts file is misconfigured, it may return a different IP address for a hostname than the one registered in the DNS server, causing connectivity issues or errors. Verified References: [Hosts file], [DNS]

A tabletop exercise is a type of disaster recovery testing exercise that is primarily used to discuss incident response strategies for critical systems without affecting production data. A tabletop exercise is a discussion-based session where team members meet in an informal, classroom setting to review their roles and responsibilities during an emergency and their responses to a hypothetical scenario. A facilitator guides the participants through the discussion and evaluates the strengths and weaknesses of the preparedness program. A tabletop exercise does not involve any actual deployment of resources oractivation of systems12. A backup recovery test (B) is a type of disaster recovery testing exercise that involves restoring data from backup media to verify its integrity and availability. A backup recovery test may affect production data if it is not performed on a separate environment. A live failover © is a type of disaster recovery testing exercise that involves switching operations from a primary site to a secondary site in case of a failure or disruption. A live failover may affect production data if it is not performed on a simulated environment. A hot-site visit audit (D) is a type of disaster recovery testing exercise that involves inspecting and evaluating a hot site, which is a backup location that has fully operational equipment and resources to resume business operations in case of a disaster. A hot-site visit audit does not involve any discussion of incident response strategies or simulation of scenarios. References: 1 https://www.ready.gov/testing-exercises 2 https://www.ready.gov/exercises

FinanceApp software is running as a service named “FinanceApp Service”. The service description says “Provides financial data and calculations for the FinanceApp software”. The service status is “Stopped”, which means that the service is not running and the software is not functional. The service startup type is “Manual”, which means that the service needs to be started manually by the user or the administrator. The service log on as is “Local System”, which means that the service runs under a predefined local account that has extensive privileges on the local computer.

To fix the issue with the FinanceApp software, you need to do two things:

First, you need to start the service, so that the software can run. To do this, you can right-click on the service name and select “Start” from the menu. Alternatively, you can select the service name and click on the “Start” button on the toolbar. You should see a message saying that the service has started successfully.

Second, you need to change the service startup type, so that the service can start automatically every time the server boots up. This way,you don’t have to contact the help desk every time the issue occurs. To do this, you can right-click on the service name and select “Properties” from the menu. Alternatively, you can select the service name and click on the “Properties” button on the toolbar. You should see a window with several tabs and options. On the “General” tab, under “Startup type”, you can select “Automatic” from the drop-down list. Then, click on “OK” to save your changes.

By doing these two steps, you should be able to use the FinanceApp software without any problems.

The MarketApp software is running as a service named “MarketApp Service”. The service description says “Provides market data and analysis for the MarketApp software”. The service status is “Running”, which means that the service is running and the software is functional. However, as you reported, the software may crash sometimes, which can cause significant downtime. The service startup type is “Automatic”, which means that the service starts automatically every time the server boots up. The service log on as is “TestAccount”, which is a test account that was probably used for development or testing purposes.

To fix the issue with the MarketApp software, you need to do one thing:

You need to change the service log on as, so that the service runs under a proper account that has sufficient permissions and security settings for production use. To do this, you can right-click on the service name and select “Properties” from the menu. Alternatively, you can select the service name and click on the “Properties” button on the toolbar. You should see a window with several tabs and options. On the “Log On” tab, under “Log on as”, you can select either “Local System account” or “This account”. If you choose “Local System account”, then the service will run under a predefined local account that has extensive privileges on the local computer. If you choose “This account”, then you will need to enter a valid username and password for an account that has appropriate permissions and security settings for running the service. You may need to consult with your IT team or your software vendor to determine which option is best for your situation. Then, click on “OK” to save your changes.

The cache is a temporary storage area that holds frequently accessed data or instructions for faster retrieval. The cache can improve the read times for accessing files by reducing the need to access the hard drive, which is slower than the cache memory1. Therefore, the first step the technician should take is to check if the cache is turned on for the new file server. If the cache is turned off, the technician should enable it and see if the read times improve. The other options are incorrect because they are not the first steps to take. Adding more memory, installing faster hard drives, or enabling link aggregation are possible ways to improve the performance of the file server, but they are more costly and time-consuming than checking the cache. Moreover, they may not address the root cause of the problem if the cache is turned off.

This is the most likely cause of preventing the users from accessing the application server because a VLAN is a logical segmentation of a network that isolates traffic based on certain criteria. If the human resources department and the application server are on different VLANs, they will not be able to communicate with each other unless there is a router or a switch that can route between VLANs.References:https://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41860-howto-L3-intervlanrouting.html

This is the best description of a hybrid cloud model because it combines both private and public cloud resources. A private cloud is a cloud environment that is owned and operated by a single organization and hosted in its own data center. A public cloud is a cloud environment that is owned and operated by a third-party provider and hosted in its data center. A hybrid cloud allows an organization to leverage both types of cloud resources depending on its needs and preferences.References:https://azure.microsoft.com/en-us/overview/what-is-hybrid-cloud-computing/

Kerberos is a network authentication protocol that uses tickets to allow clients and servers to prove their identity to each other. Kerberos relies on accurate time synchronization between the parties involved, as the tickets have expiration dates and timestamps. If the system clock of a Linux server is off by more than five minutes from the LDAP server or the domain controller, the Kerberos authentication will fail and generate errors. A local firewall is unlikely to block authentication requests if the server can communicate over the network and is configured correctly. The users’ passwords are not relevant if theyare known-working LDAP credentials. The server has access to the LDAP host if it can communicate over the network and is configured correctly. References:

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/identity_management_guide/kerberos_errors

https://www.ibm.com/docs/en/aix/7.2?topic=authentication-kerberos-time-synchronization

The RAID level that should be implemented to maximize usable capacity without requiring redundancy is RAID 0. RAID (Redundant Array of Independent Disks) is a technology that combines multiple physical disks into a logical unit that provides improved performance, reliability, or both. RAID 0 is a RAID level that splits data evenly across two or more disks without parity or mirroring. RAID 0 does not provide any redundancy or fault tolerance, but it increases usable capacity and performance by allowing parallel read and write operations.

RAID 5 is a RAID level that uses disk striping with parity. It requires a minimum of three disks and can handle one disk failure. RAID 5 distributes the parity information across all the disks in the array, which improves the read performance and reduces the write penalty. The capacity of a RAID 5 array is (N-1) times the size of the smallest disk, where N is the number of disks in the array. Therefore, for six 4TB disks, the capacity of a RAID 5 array would be (6-1) x 4TB = 20TB, which meets the minimum disk space requirement of 19TB. RAID 5 also has the leastamount of disk space lost to RAID overhead among the options, as it only uses onedisk’s worth of space for parity

RTO stands for Recovery Time Objective and it is a metric that defines the maximum acceptable amount of time that a system or service can be unavailable after a disaster or disruption. RTO is part of the business continuity planning and disaster recovery planning processes. RTO ensures a guarantee of the amount of time it will take to restore a downed service by setting a target or goal for recovery. RTO can vary depending on the criticality and priority of the service.References: https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 3.3)