Pass the CompTIA Server+ SK0-005 Questions and answers with ExamsMirror

Bollards are an example of a method that is used to prevent motor vehicles from getting too close to building entrances and exits. Bollards are short, sturdy posts that are installed on sidewalks, parking lots, or roads to create physical barriers and control traffic flow. Bollards can be used to protect pedestrians, buildings, or other structures from vehicle collisions or attacks. Bollards can be made of various materials, such as metal, concrete, or plastic, and can be fixed, removable, or retractable.

If users cannot access a new server by name, but the server does respond to a ping request using its IP address, it means that there is a problem withname resolution. The DNS (Domain Name System) is a service that maps hostnames to IP addresses and vice versa. Therefore, the best step to perform next is to examine the DNS to see if the new server record exists and matches its IP address. If not, the DNS record needs to be added or updated accordingly. Running the tracert command from a workstation would not help with name resolution, as it only shows the route taken by packets to reach a destination by IP address. Correcting the missing DHCP scope would not help either, as DHCP (Dynamic Host Configuration Protocol) only assigns IP addresses and other network settings to clients, but does not resolve names. Updating the workstation hosts file would be a temporary workaround, but not a permanent solution, as it would require manually editing every workstation’s hosts file with the new server’s name and IP address. References: https://www.howtogeek.com/164981/how-to-use-nslookup-to-check-domain-name-information-in-microsoft-windows/https://www.howtogeek.com/howto/27350/beginner-geek-how-to-edit-your-hosts-file/

A misconfigured hosts file can cause name resolution issues on a server. A hosts file is a text file that maps hostnames to IP addresses on a local system. It can be used to override DNS settings or provide custom name resolution for testing purposes. However, if the hosts file contains incorrect or outdated entries, it can prevent the system from resolving hostnames properly and cause connectivity problems. To fix this issue, the administrator should check and edit the hosts file accordingly.

This is the best way to proceed with troubleshooting when the technician has several possible solutions to a reported server issue. Making one change at a time and testing allows the technician to isolate the cause and effect of each solution and determine which one works best. It also helps to avoid introducing new problems or complicating existing ones by making multiple changes at once. Determining whether there is a common element in the symptoms causing multiple problems is a good step to perform before identifying possible solutions, but not after. Performing a root cause analysis is a good step to perform after resolving the issue, but not during. Documenting the findings, actions, and outcomes throughout the process is a good practice to follow at every step of troubleshooting, but not a specific way to proceed with testing possible solutions. References: https://www.howtogeek.com/174288/how-to-tell-if-your-computer-is-overheating-and-what-to-do-about-it/https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/

The administrator should use a subnet mask of 255.255.255.0 for this setup. A subnet mask is a binary number that defines how many bits of an IP address areused for the network portion and how many bits are used for the host portion. The network portion identifies the specific network that the IP address belongs to, while the host portion identifies the specific device within that network. The subnet mask is usually written in dotted decimal notation, where each octet represents eight bits of the binary number. A 1 in the binary number means that the corresponding bit in the IP address is part of the network portion, while a 0 means that it is part of the host portion. For example, a subnet mask of 255.255.255.0 means that the first 24 bits (three octets) of the IP address are used for the network portion and the last 8 bits (one octet) are used for the host portion. This subnet mask allows up to 254 hosts per network (2^8 - 2). In this case, the IP address of 10.20.10.15 and the default gateway of 10.20.10.254 belong to the same network of 10.20.10.0/24 (where /24 indicates the number of bits used for the network portion), which can be defined by using a subnet mask of 255.255.255.0.

The access control methodology that can be described best as allowing a user the least access based on the jobs the user needs to perform is role-based access control (RBAC). RBAC is an access control method that assigns permissions to users based on their roles or functions within an organization. RBAC provides fine-grained and manageable access control by defining what actions each role can perform and what resources each role can access. RBAC follows the principle of least privilege, which means that users are only granted the minimum level of access required to perform their tasks. RBAC can reduce security risks, simplify administration, and enforce compliance policies.

A port scanner is the tool that would most likely help the analyst determine if the applications are running on a remote server. A port scanner is a software tool that scans a network device for open ports. Ports are logical endpoints for network communication that are associated with specific applications or services. By scanning the ports on a remote server, the analyst can identify what applications or services are running on that server and what protocols they are using. A port scanner can also help detect potential vulnerabilities or misconfigurations on a server.

Secure Sockets Layer (SSL): SSL and its successor Transport Layer Security (TLS) enable client and server computers to establish a secure connection session and manage encryption and decryption activities.

The best solution to investigate the failure of a server in a remote datacenter is out-of-band management. Out-of-band management is a method of accessing and controlling a server or a device using a dedicated channel that is separate from its normal network connection. Out-of-band management can use various technologies, such as serial ports, modems, KVM switches, or dedicated management cards or interfaces. Out-of-band management can provide remote access to servers or devices even when they are powered off, unresponsive, or disconnected from the network. Out-of-band management can enable troubleshooting, configuration, maintenance, or recovery tasks without requiring physical presence at the server location.