Pass the CompTIA Linux+ XK0-005 Questions and answers with ExamsMirror

The systemct1 reload sshd command can be used to apply the configuration changes of the SSH server daemon without restarting it. This is useful to avoid interrupting existing connections. The systemct1 stop sshd command would stop the SSH server daemon, not apply the changes. The systemct1 mask sshd command would prevent the SSH server daemon from being started, not apply the changes. The systemct1 start sshd command would start the SSH server daemon if it is not running, but it would not apply the changes if it is already running. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Secure Shell (SSH), page 415.

The correct command to block the IP address 192.168.10.50 from accessing a Linux server is iptables -A INPUT -s 192.168.10.50 -j DROP. This command appends a rule to the INPUT chain that matches the source address 192.168.10.50 and jumps to the DROP target, which discards the packet. The other commands are incorrect because they either have invalid syntax, wrong parameters, or wrong order of arguments. References: CompTIA Linux+ Study Guide, Fourth Edition, page 457-458.

The correct command to list all local accounts in which the UID is greater than 500 is:

awk -F: '$3 > 500 {print $1}' /etc/passwd

This command uses awk to process the /etc/passwd file, which contains information about the local users on the system. The -F: option specifies that the fields are separated by colons. The $3 refers to the third field, which is the UID. The condition $3 > 500 filters out the users whose UID is greater than 500. The action {print $1} prints the first field, which is the username.

The other commands are incorrect because:

find /etc/passwd —size +500 will search for files that are larger than 500 blocks in size, not users with UID greater than 500.

cut —d: fl / etc/ passwd > 500 will cut the first field of the /etc/passwd file using colon as the delimiter, but it will not filter by UID or print only the usernames. The > 500 part will redirect the output to a file named 500, not compare with the UID.

sed '/UID/' /etc/passwd < 500 will use sed to edit the /etc/passwd file and replace any line that contains UID with 500, not list the users with UID greater than 500. The < 500 part will redirect the input from a file named 500, not compare with the UID.

The ssh-copy-id command is used to copy a public SSH key from a local machine to a remote server and add it to the authorized_keys file, which allows passwordless authentication between the machines. The administrator can use this command to copy the root user’s public key from nodea to nodeb, and vice versa, to enable SSH access between the nodes without entering a password every time. For example: [root@nodea ssh-copy-id -i ~/.ssh/id_rsa root@nodeb]. The ssh command is used to initiate an SSH connection to a remote server, but it does not copy any keys. The scp command is used to copy files securely between machines using SSH, but it does not add any keys to the authorized_keys file. The ssh-add command is used to add private keys to the SSH agent, which manages them for SSH authentication, but it does not copy any keys to a remote server.

The slowness is caused by the CPU being overloaded. The iostat command shows that the CPU utilization is 100%, which means that there are more processes competing for CPU time than the CPU can handle. The other options are incorrect because:

The system is not running out of swap space, as shown by the iostat command, which shows that there is no swap activity (si and so columns are zero).

The memory is not exhausted, as shown by the free -m command, which shows that there is still available memory (avail column) and free buffer/cache memory (buff/cache column).

The processes are not paging, as shown by the vmstat command, which shows that there are no major page faults (majflt column) and no swap activity (si and so columns). References: CompTIA Linux+ Study Guide, Fourth Edition, page 417-419, 424-425.

To run a script file, the user needs to have execute permission on the file. The command chmod u+x /home/user/script.sh (A) will grant execute permission to the owner of the file, which is the user who created it. The other commands will not give execute permission to the user, and therefore will not allow the script to run properly. References:

[CompTIA Linux+ Study Guide], Chapter 3: Working with Files, Section: Changing File Permissions

[How to Make a Bash Script Executable]

Based on the output of the image sent by the user, the system is under CPU pressure and will require additional vCPUs. The output shows that there are four processes running upload.sh scripts that are consuming a high percentage of CPU time (99.7%, 99.6%, 99.5%, and 99.4%). The output also shows that the system has only 4 vCPUs, which means that each process is using almost one entire vCPU. This indicates that the system is struggling to handle the CPU load and may experience performance issues or slowdowns. Adding more vCPUs to the system would help to alleviate the CPU pressure and improve the system performance. The system has not been running for over a year, as the uptime command shows that it has been up for only 1 day, 2 hours, and 13 minutes. The number of users logged in to the system is not relevant to the performance issue, as they are not consuming significant CPU resources. The system does not require more memory, as the free command shows that it has plenty of available memory (49 GB total, 48 GB free). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 15: Managing Memory and Process Execution, pages 468-469.

The server’s CPU is spending too much time waiting for data inputs. This can be inferred from the output of the top command, which shows the percentage of CPU time spent in different states. The wa state stands for wait, and it indicates that the CPU is idle while waiting for an I/O operation to complete. In this case, the wa state is 52.4%, which means that more than half of the CPU time is wasted on waiting for data inputs. This can cause a high I/O latency and affect the performance of the server.

The other options are not correct based on the output received from the executed command. The server’s CPU is not taking too long to process users’ requests, because the us state, which stands for user, is only 0.2%, which means that the CPU is barely used by user processes. The server’s CPU does not show a high idle-time value, because the id state, which stands for idle, is 0.0%, which means that the CPU is not idle at all. The server’s CPU value for the time spent on system processes is not low, because the sy state, which stands for system, is 33.1%, which means that the CPU is heavily used by system processes.

The command pam_tally2 -u joe -r will resolve the issue of Joe being unable to log in to the Linux system. The pam_tally2 command is a tool for managing the login counter for the PAM (Pluggable Authentication Modules) system. PAM is a framework for managing authentication and authorization on Linux systems. PAM allows the administrator to define the rules and policies for accessing various system resources and services, such as login, sudo, ssh, or cron. PAM also supports different types of authentication methods, such as passwords, tokens, biometrics, or smart cards. PAM can be used to implement login restrictions, such as limiting the number of failed login attempts, locking the account after a certain number of failures, or enforcing a minimum or maximum time between login attempts. The pam_tally2 command can display, reset, or unlock the login counter for the users or hosts. The -u joe option specifies the user name that the command should apply to. The -r option resets the login counter for the user. The command pam_tally2 -u joe -r will reset the login counter for Joe, which will unlock his account and allow him to log in to the Linux system. This will resolve the issue of Joe being unable to log in to the Linux system. This is the correct command to use to resolve the issue. The other options are incorrect because they either do not unlock the account (usermod -s /bin/bash joe or passwd -u joe) or do not affect the login counter (chage -E 90 joe). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 17: Implementing Basic Security, page 517.

The remediation step that will prevent the web service from running as a privileged user is adding the User=webservice to the [Service] section of the service file. The service file is a configuration file that defines the properties and behavior of a systemd service. The systemd is a system and service manager that controls the startup and operation of Linux systems. The service file contains various sections and options that specify how the service should be started, stopped, and managed. The [Service] section defines how the service should be executed and what commands should be run. The User option specifies the user name or ID that the service should run as. The webservice is the name of the user that the administrator wants to run the web service as. The administrator should add the User=webservice to the [Service] section of the service file, which will prevent the web service from running as a privileged user, such as root, and improve the security of the system. This is the correct remediation step to use to prevent the web service from running as a privileged user. The other options are incorrect because they either do not change the user that the service runs as (removing the ExecStart=/usr/sbin/webserver -D OPTIONS from the service file or updating the EnvironmentFile line in the [Service] section to /home/webservice/config) or do not affect the user that the service runs as (changing the multi-user.target in the [Install] section to basic.target). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 15: Managing System Services, page 458.