Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Home
Riverbed
RCPE-CP-WO
830-01
RCPE Certified Professional WAN Optimization Questions and Answers

Pass the Riverbed RCPE-CP-WO 830-01 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam 830-01 Premium Access

View all detail and faqs for the 830-01 exam

Go to Exam

776 Students Passed

97% Average Score

97% Same Questions

Viewing page 9 out of 12 pages

Viewing questions 81-90 out of questions

Questions # 81:

The Home page in the Management Console for the CMC appliance can be configured to display what information?

Options:

Default login used by the CMC appliance for each appliance

Last hour of throughput across all managed appliances

Status of each individual alarm for each managed Steelhead appliance

Last 20 lines of a Steelhead appliance's system log file

Answer

Questions # 82:

What should you do when you receive the following message?

[intercept.NOTICE] sending kickoff RST: 10.35.178.41:1169 -> 10.110.141.30:1031.

Options:

Nothing. This is just a notice message.

Verify whether the "Reset Existing Client Connections on Start Up" option is checked and uncheck it

Switch off the Steelhead appliance

Create a specific pass-through rule to bypass the above source and destination hosts

Restart the Steelhead appliance

Answer

Questions # 83:

What are the default port labels on an Interceptor appliance?

Options:

Optimized, Pass-through, Blocked

Interactive, RBT-Proto, Secure

RBT-Proto, Enabled, Disabled

Named differently from those on the Steelhead appliance

Port labels do not exist on an Interceptor appliance

Answer

Questions # 84:

Which physical Steelhead interface communicates with the Interceptor appliance?

Options:

AUX

Primary

wan0_0

B and C

A, B, and C

Answer

Questions # 85:

Refer to the exhibit.

Question # 85

Corp-A and Corp-B have overlapping address space and therefore the network administrator implemented NAT to overcome this. Users from Corp-A NAT to 172.16.1.0/24 and users from Corp-B NAT to 172.16.2.0/24. Users in Corp-A use the destination address of 172.16.2.0/24 to access the resources in Corp-B. The servers in Corp-B use the client IP for authentication. You deploy the Steelhead appliance using the default WAN visibility mode but noticed all the connections are passed-through. What is the likely problem?

Options:

When the Steelhead appliance in Corp-B opens the outer connection, it is using the source IP of 172.16.2.x instead of 192.168.1.x

On the Steelhead appliance in Corp-B, there is a missing static route for the 192.168.1.0/25 network

On the Steelhead appliance in Corp-A, there is a missing static route for the 172.16.2.0/24 network

When the Steelhead appliance in Corp-B opens the outer connection, it is using the source IP of 192.168.1.x instead of 172.16.1.x

None of the above

Answer

Questions # 86:

What command should you use to see the direct URL of a package?

Options:

show rsp slots

show rsp modules

show rsp platform

show rsp packages

show rsp vms

Answer

Questions # 87:

Refer to the exhibit.

Question # 87

A user from one of your branch offices reports connections to servers are failing after a new deployment. The exhibit shows how the Steelhead appliances have been deployed. Which of the following will most likely fix the issue? (Select 2)

Options:

Fixed-target rule is needed on the client-side Steelhead appliance

Change the WCCP to use Redirect Out instead of Redirect In

Remove Redirect-IN from the LAN at the Branch Office

Add Redirect-IN on the WAN at the HQ

Remove fixed-target rule from the server-side Steelhead appliance

Answer

A, D

Questions # 88:

To increase the high availability of a site at a remote office, you decided to install a second Steelhead appliance as an active/active serial cluster. However, after installing the second Steelhead appliance at the remote site, users started complaining about slow access to the data center. You have verified that this is not a duplex issue. At the data center location all users access the Internet which pass-through the Steelhead appliances. What is the most likely problem?

Options:

SMB Signing

Oplock issue

The serial cluster Steelhead appliances are peering to each other

Simplified routing was enabled on the secondary Steelhead appliance

The datastore on the Steelhead appliances are wrapping

Answer

Questions # 89:

Refer to the exhibit.

Question # 89

A customer is reporting that the first connection from a user to the server is failing. However, subsequent connections work properly and are optimized. How can this problem best be resolved?

Options:

Fixed-target rule

Enable RIP/OSPF on the routers

Enable Simplified Routing

Enable QoS

Enable RIP/OSPF on the Steelhead appliances

Answer

Questions # 90:

You have an in-house HTTP application running on port 8443 but you are not seeing HTTP optimization. You checked and made sure that the HTTP blade is enabled. What is the likely problem?