Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the AEE Energy Management CEM Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam CEM Premium Access

View all detail and faqs for the CEM exam


810 Students Passed

97% Average Score

98% Same Questions
Viewing page 3 out of 4 pages
Viewing questions 21-30 out of questions
Questions # 21:

Which of the following is a closed-loop controller?

Options:

A.

Time clock schedule controller

B.

Thermostat for an air conditioning unit

C.

Manual dimmer for a light switch

D.

Accelerator pedal in an automobile

Questions # 22:

If installed without ancillary equipment, photovoltaic power cells generate what type of power?

Options:

A.

Sinusoidal alternating current

B.

Square-wave alternating current

C.

Direct current

Questions # 23:

You can buy air compressor A for $15,000 or air compressor B for $6,000. Compressor A will cost $10,000 per year to operate. Compressor B will cost $11,500 per year to operate. If both air compressors have a 10-year life and your required return on investment is 12%, which air compressor has the lowest total life-cycle cost?

Options:

A.

Compressor A

B.

Compressor B

C.

Both air compressors have the same life-cycle cost

Questions # 24:

According to ISO 50001. when performing internal audits on the energy management system in an organization the internal auditor should do which of the following?

SELECT THE CORRECT ANSWER

Options:

A.

Focus on the areas of significant energy use

B.

Review the written procedures related to the area under audit

C.

Assess actual activities as practiced against what the written procedures state

D.

Look for opportunities for energy improvement and to minimize bureaucracy inthe energy management system

E.

All of the above

Questions # 25:

In an ammonia-water absorption chiller, what material is the refrigerant?

Options:

A.

Some form of fluorocarbon

B.

Water

C.

Lithium bromide

D.

Ammonia

Questions # 26:

A gas-fired boiler is operating with 31.9% excess air. A feedwater economizer is used to reduce the stack temperature rise from 310°C to 160°C. Using the natural gas combustion efficiency tables in your workbook, find the energy savings from the economizer as a percentage of historical fuel consumption.

Options:

A.

1.2%

B.

3.1%

C.

5.8%

D.

7.1%

E.

9.3%

Questions # 27:

Which of the following is NOT a typical benefit of performance contracting from the building owner's perspective?

Options:

A.

Performance contracting is a simple and quick process

B.

Net cash flow can be neutral or positive for the owner

C.

The energy-service company can have a financial incentive to achieve projected savings

D.

Maintenance services provided by the performance contractor can add value to the overall savings achieved

E.

Performance contracting can provide access to external financing when the owner may not have sufficient equity for in-house financing for large projects

Questions # 28:

Air is heated from 10°C (dry bulb temperature) and 80% relative humidity to 32°C (dry bulb temperature). What is the new relative humidity?

Options:

A.

20%

B.

30%

C.

40%

D.

60%

E.

80%

Questions # 29:

You are using a performance contract to finance the added cost of using more-efficient equipment in the construction of a new building. Which of the following International Performance Measurement and Verification Protocol (IPMVP) options would you use to verify annual energy savings?

Options:

A.

Option A - Retrofit isolation: key parameter measurement

B.

Option B - Retrofit isolation: all parameter measurement

C.

Option C - Whole facility measurement

D.

Option D - Calibrated simulation

E.

Option E - Stipulated savings

Questions # 30:

What is the definition of lamp life for a fluorescent lamp?

Options:

A.

The time at which lamps begin to fail

B.

The time at which 50% of a large sample of lamps have failed

C.

The time at which 70% of a large sample of lamps have failed

D.

The time at which lumen output has reduced by 50%

E.

The time at which lumen output has reduced to 70% of the initial light output

Viewing page 3 out of 4 pages
Viewing questions 21-30 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.