BICSI Installer 2 - Copper Exam (INSTC_V8) Practice Test

Questions # 1:

Which of the following topologies is the recommended topology for distribution systems in campus environments?

Options:

Hierarchical Star

Star

Tree

Ring

Questions # 2:

If the specified diameter for a conduit run is 25 mm (1 in), but an installer only has 20 mm (¾ in) conduit available, what is the MOST appropriate BICSI-recommended solution?

Options:

Use the 20 mm conduit but reduce the cable count

Combine multiple 20 mm conduits side-by-side

Obtain the specified 25 mm conduit or larger

Increase the tension while pulling to fit cables into the 20 mm conduit

Questions # 3:

What is the recommended thickness for plywood that will be mounted on the walls of a telecommunications room?

Options:

12.7 mm (1/2")

19 mm (3/4")

25 mm (1")

32 mm (1-1/4")

Questions # 4:

What method of transmission is used to transmit signals during a telephone call?

Options:

Simplex

Half-duplex

Full duplex

Questions # 5:

Which of the following is an ACCEPTABLE practice for labeling telecommunications infrastructure per TIA-606 labeling standard and BICSI best practices?

Options:

Using color-coded heat shrink directly on the copper conductors

Affixing labels on the cables within 150 mm (6 in) of the termination point

Handwriting labels on a piece of tape around the cable bundle

Labeling only the patch panels and leaving cables unlabeled

Questions # 6:

Which topology uses a linear configuration that places all network devices on one length of cable?

Options:

Star

Ring

Bus

Questions # 7:

In a commercial environment, if your horizontal cable run is 92 m (302 ft) from the TR to the Work Area, which action is recommended to remain within channel length standards?

Options:

Use plenum-rated cable to extend the allowable distance

Add an additional TR closer to the Work Area

Utilize Category 7 cable instead of Category 6

Convert the horizontal run to a multi-mode fiber link

Questions # 8:

Which of the following is used to establish a 0 volt (V) reference for ac electrical power systems?

Options:

Alternating current (AC) grounding electrode system

Telecommunication bonding infrastructure

Equipment grounding system

Questions # 9:

Which of the following should be used to install plywood in a telecommunications room if the edge of the board does NOT align with the wall studs?

Options:

Toggle bolts

Metal nails

Galvanized screws

Questions # 10:

Which of the following refers to a set of rules issued by a governmental body at the state level within the US?

Options:

Regulations

Best Practices

Applications

Guidelines

Viewing page 1 out of 5 pages

Viewing questions 1-10 out of questions

Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the BICSI Cabling Installation INSTC_V8 Questions and answers with ExamsMirror

Exam INSTC_V8 Premium Access

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

TOP CODES