BICSI Installer 2 - Copper Exam (INSTC_V8) Practice Test

Questions # 41:

Which of the following is a floor serving space that serves as a point of termination for horizontal and backbone cables?

Options:

Questions # 42:

Which of the following is used to express system gain and loss?

Options:

Ohms

Henries

Farads

Decibel (dB)

Questions # 43:

Which of the following fire ratings refers to the time period that the unexposed surface of a firestop assembly does not exceed 180 degrees C (325 degrees F) above its initial temperature?

Options:

E rating

FT rating

FH rating

S rating

Questions # 44:

Which of the following terms describes the unwanted signal coupling from a disturbing pair of a 4-pair cable channel to a disturbed pair of another 4-pair channel?

Options:

NEXT - Near end crosstalk

ACRF - attenuation to crosstalk ratio far end

AXT - alien crosstalk

Questions # 45:

A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?

Options:

Simplex

Half-duplex

Full-duplex

Questions # 46:

When using a cable lubricant in a conduit system, which of the following is a key characteristic to look for to ensure it meets BICSI recommendations?

Options:

A petroleum-based, highly viscous compound

A water-based, non-staining, non-toxic lubricant compatible with cable jackets

An adhesive-based formula to prevent cable movement

A powdered graphite to minimize friction

Questions # 47:

Which type of tester includes a set of modular plugs?

Options:

Inductive amplifier

Tone generator

Multimeter

Cable-end locator kit

Questions # 48:

Which of the following items may be used as a substitute device for a pulling eye?

Options:

Wire mesh grip

Fan-out kit

Innerduct

D rings

Questions # 49:

When installing optical fiber cable in a cable tray with a 15 cm (6 in) inside depth, which of the following support practices is MOST appropriate to adhere to bend radius requirements?

Options:

Place cables loosely along the tray without ties.

Use Velcro® straps and secure them at 2 m (6 ft) intervals.

Tie-wrap the cables tightly at every 30 cm (12 in).

Maintain at least twice the manufacturer’s recommended bend radius by using fittings or supports at each transition point.

Viewing page 5 out of 5 pages

Viewing questions 41-50 out of questions

Spring Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the BICSI Cabling Installation INSTC_V8 Questions and answers with ExamsMirror

Exam INSTC_V8 Premium Access

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

TOP CODES