Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with ExamsMirror

The command cpinfo -y all can be used to have cpinfo display all installed hotfixes. Cpinfo is a tool that collects diagnostic data from a Check Point gateway or management server. The data includes configuration files, logs, status reports, and more. The -y parameter is used to specify which sections of data to include in the cpinfo output. The value all means to include all sections, including the hotfixes section, which shows the list of hotfixes installed on the system. References: Check Point Security Expert R81 Course, cpinfo Utility

ClusterXL is a clustering technology that provides high availability and load sharing for Security Gateways. ClusterXL uses a proprietary protocol called Check Point Cluster Protocol (CCP) to communicate between cluster members. CCP has two main functions: Health Check and State Synchronization. Health Check is the mechanism that monitors the status and availability of each cluster member and determines which member is the active one. State Synchronization is the mechanism that synchronizes the connection and NAT tables between cluster members to ensure a smooth failover in case of a member failure. CCP uses UDP port 8116 for both Health Check and State Synchronization messages. The other options are not correct because:

A. CCP and 18190: This option is incorrect because CCP does not use port 18190. Port 18190 is used by Secure Internal Communication (SIC) between Security Gateways and Management Servers.

B. CCP and 257: This option is incorrect because CCP does not use port 257. Port 257 is used by Check Point Security Management Protocol (CPM) for communication between SmartConsole and Management Servers.

D. CPC and 8116: This option is incorrect because there is no such protocol as CPC in ClusterXL.

References: ClusterXL R81.20 Administration Guide, ClusterXL Administration Guide R80.40, sk25977 - Ports used by Check Point software

Threat Emulation is a software blade that takes minutes to complete (less than 3 minutes). Threat Emulation analyzes files for malicious behavior by running them in a virtual sandbox. Threat Emulation works on MS Office, PDF, executables, and archive files. Threat Emulation does not always deliver a file, but only if no threats are found or if the user chooses to download the original file after seeing a warning message. References: Check Point Security Expert R81 Course, Threat Emulation Administration Guide

For Management High Availability, the valid synchronization status options are:

A. Collision

B. Down

C. Lagging

D. Never been synchronized

In this context, "Down" indicates that the synchronization is not functioning correctly or that the standby management server is not reachable. This is a valid synchronization status, so the answer is not B.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

In R81, the Mobile Access policy is created and modified in SmartConsole. SmartConsole is the management interface for configuring and managing various security policies, including Mobile Access policies.

References: Check Point Certified Security Expert R81 documentation and learning resources.

The Correlation Unit in SmartEvent architecture has the function of analyzing each log entry as it arrives at the log server according to the Event Policy. When it identifies a threat pattern, it forwards an event to the SmartEvent Server. This is an essential function in threat detection and analysis, as it helps in identifying and alerting about security threats based on the configured policies.

Option A correctly describes the function of the Correlation Unit, making it the verified answer.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

The benefit of fw monitor over tcpdump is that with fw monitor, you can see the inspection points, which cannot be seen in tcpdump. Inspection points are the locations in the firewall kernel where packets are inspected by the security policy and other software blades. Fw monitor allows you to capture packets at different inspection points and see how they are processed by the firewall. Tcpdump, on the other hand, is a generic packet capture tool that only shows the packets as they enter or leave the network interface. References: Check Point Security Expert R81 Course, fw monitor, tcpdump

Automation and Orchestration differ in that automation relates to codifying tasks, whereas orchestration relates to codifying processes. Automation is the process of converting manual tasks into executable scripts or programs that can be run by machines or software agents. Orchestration is the process of coordinating multiple automated tasks into a coherent workflow that achieves a desired outcome or goal. Orchestration can also involve integrating different systems, tools, and services through web service interactions such as XML and JSON. References: Check Point Security Expert R81 Course, Automation & Orchestration Administration Guide

Check Point's SecureXL technology, which is responsible for acceleration, has certain limitations and conditions under which acceleration may not occur. In this context, the question is asking about factors that will NOT affect acceleration.

Option B, "A 5-tuple match," will not affect acceleration. A 5-tuple match refers to the matching of source IP, source port, destination IP, destination port, and protocol. SecureXL can accelerate traffic that matches these criteria, but it's not a factor that hinders acceleration.

Options A, C, and D can all affect acceleration:

Option A mentions "Connections destined to or originated from the Security gateway," which implies that SecureXL acceleration can apply to these connections.

Option C mentions "Multicast packets," and SecureXL may have limitations in handling multicast traffic efficiently.

Option D mentions "Connections that have a Handler (ICMP, FTP, H.323, etc.)," and certain protocols (such as FTP) may require special handling and might not be fully accelerated by SecureXL.

References: Check Point Certified Security Expert R81 Study Guide

In a Cpinfo (Checkpoint information) command, various information is collected from a Security Gateway. However, firewall logs are NOT collected from a Security Gateway in a Cpinfo.

A. Firewall logs

The Cpinfo command typically collects information such as configuration and database files, system message logs, OS and network statistics, but it does not include firewall logs. Firewall logs are usually obtained separately using other methods or tools.

References: Check Point Certified Security Expert R81 Study Guide, Check Point documentation on Cpinfo.

 The fwaccel stat command on the gateway shows the status of SecureXL acceleration, including the number of accelerated and non-accelerated connections, and the reason for non-acceleration. The reason for non-acceleration can be either a rule that disables templating, or a feature that is not supported by SecureXL. To determine which rule disables templating, the administrator can use the -s option to show the rule numbers and names. For example:

Check Point API is a set of web services that enable the usage of functions and commands in a dynamic and automated fashion. Check Point API is available in different types, each serving a different purpose and functionality. According to the Check Point Resource Library1, the following are the types of Check Point API available in R81.x:

Identity Awareness Web Services: This type of API allows external applications to send identity and location information to the Security Gateway, which can then use this information for policy enforcement. Identity Awareness Web Services can be used for scenarios such as guest registration, captive portal, identity agents, etc.

OPSEC SDK: This type of API provides a framework for developing applications that interact with Check Point products using the OPSEC (Open Platform for Security) protocol. OPSEC SDK can be used for scenarios such as log export, event management, anti-virus integration, etc.

Management: This type of API allows external applications to perform management operations on the Check Point Management server using RESTful web services. Management API can be used for scenarios such as policy installation, object creation, configuration backup, etc.

Mobile Access is not a type of Check Point API, but rather a feature that provides secure remote access to corporate resources from various devices. Mobile Access uses SSL VPN technology and supports different authentication methods and access scenarios.

References: What is an API Gateway?, How to use Check Point API with Postman quick guide, Home - Check Point Developers, Introduction to RESTful APIs and JSON format, Checkpoint API tutorial, part 1 - getting started

To deploy a TE250X Check Point appliance just for email traffic and in-line mode without a Check Point Security Gateway, you can utilize Check Point Cloud Services. In this scenario, you can leverage cloud-based email security services provided by Check Point without the need for an on-premises Security Gateway.

Option C correctly states that you can use only Check Point Cloud Services for this scenario, making it the verified answer.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

Implicit MEP (Multicast Ethernet Point) options refer to the way multicast traffic is handled within a network. In this case, the question is asking about an implicit MEP option, and the correct answer is:

A. Primary-backup: This is an implicit MEP option where one switch (primary) forwards multicast traffic while the other switch (backup) does not forward the traffic. It is used to ensure redundancy in case the primary switch fails.

B. Source address-based, C. Round-robin, and D. Load Sharing are not implicit MEP options; they are different methods of handling multicast traffic and do not describe the concept of primary-backup.

Therefore, option A is the correct answer as it represents an implicit MEP option.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

The cvpnd_restart command is used to restart the daemon after making modifications to the $CVPNDIR/conf/cvpnd.C file. The cvpnd daemon is responsible for managing the communication between the Check Point components and the Content Vectoring Protocol (CVP) server. The CVP server is an external server that provides content inspection and filtering services for Check Point gateways. The $CVPNDIR/conf/cvpnd.C file contains the configuration settings for the cvpnd daemon, such as the CVP server IP address, port number, timeout value, and debug level. References: Check Point Security Expert R81 Course, Content Inspection Using ICAP, cvpnd daemon debug file