Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with ExamsMirror

In R81.20, dbedit scripts are being replaced by the mgmt_cli utility for managing and configuring security policies and objects. Here's an explanation of each option:

A. dbedit is not supported in R81.20: This is not entirely accurate. While dbedit is still available and functional in R81.20, it is being phased out in favor of mgmt_cli for policy and object management.

B. dbedit is fully supported in R81.20: This statement is not accurate because although dbedit can still be used, it is not the primary recommended tool for policy management in R81.20.

C. You can use dbedit to modify threat prevention or access policies, but not create or modify layers: This statement is partially true, but it does not provide the complete picture. You can use dbedit for some policy-related tasks, but it's not the primary tool for policy management in R81.20.

D. dbedit scripts are being replaced by mgmt_cli in R81.20: This is the correct and recommended approach. mgmt_cli is the primary tool for managing security policies and objects in R81.20, and it is gradually replacing dbedit for these tasks.

Therefore, option D is the most accurate and recommended answer.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

The correct command to verify the CPUSE (Check Point Update Service Engine) version is:

Option B is incorrect because it uses the "[Expert@HostName:0]#" prompt, which is typically used for expert mode commands, but the CPUSE version can be checked using the "show installer status build" command in standard mode.

Option C is incorrect because it uses the "[Expert@HostName:0]#" prompt, and while it includes the "build" parameter, it's not the standard command to check the CPUSE version.

Option D is incorrect because it uses the "HostName:0>" prompt, but it lacks the "show" command and uses "build" instead of "status build."

References: Check Point Certified Security Expert R81 documentation

Check Point Capsule is a suite of solutions designed to provide comprehensive mobile security and secure access. The components of Check Point Capsule include:

Capsule Docs (Option A): A component that secures document sharing and protects sensitive data.

Capsule Cloud (Option B): A component that provides cloud-based security services.

Capsule Workspace (Option D): A component that provides secure workspace on mobile devices.

Option C, "Capsule Enterprise," is not a recognized component of Check Point Capsule based on the available information. Therefore, it is the correct answer as the component that is NOT part of Check Point Capsule.

References: Check Point Certified Security Expert (CCSE) R81 training materials and documentation.

 SecureXL templates are a mechanism to accelerate the rate of connection establishment by grouping connections that match a particular service and whose sole differentiating element is the source port. SecureXL templates enable even the very first packets of a TCP handshake to be accelerated, without waiting for the Firewall kernel to create a connection entry. The first packets of the first connection on the same service will be forwarded to the Firewall kernel, which will then create a template of the connection. The template will contain all the relevant information for the connection, such as source and destination IP addresses, destination port, NAT information, policy decision, etc. The template will be used by SecureXL to handle subsequent connections on the same service, without involving the Firewall kernel. This reduces the CPU load and increases the throughput.

There are three types of SecureXL templates: Accept, Drop, and NAT. Accept templates are used for connections that are allowed by the Firewall policy. Drop templates are used for connections that are blocked by the Firewall policy. NAT templates are used for connections that require NAT translation. Deny templates are not a valid type of SecureXL template.

References: SecureXL NAT Templates in R80.20 and lower, Part 3 - SecureXL, Security Gateway Performance Optimization - Part 5 - SecureXL

To add a file to the Threat Prevention Whitelist, you need two items:

B. Object Name and MD5 signature

You need the Object Name to identify the file or object you want to whitelist, and the MD5 signature to specify the unique hash value of that file. The MD5 signature ensures that the specific file you want to whitelist is identified accurately.

References: Check Point Certified Security Expert R81 Study Guide, Threat Prevention Administration Guide.

VPN Link Selection is a feature that allows the Security Gateway to select the best link for each VPN tunnel based on the network topology and the Link Selection configuration1. When the primary VPN link goes down, the Firewall can update the Link Selection entries to start using a different link for the same tunnel, as long as the remote peer supports this feature and has multiple IP addresses configured2. This way, the VPN tunnel can be maintained without interruption or renegotiation. The other options are not correct because:

Firewall

A. The Firewall will not drop the packets, but will try to send them over another link if possible.

Firewall

C. The Firewall will not send out the packet on all interfaces, but will use the routing table to determine the best interface for each destination.

Firewall

D. The Firewall will not inform the client that the tunnel is down, but will try to keep the tunnel up by switching to another link.

References: IPSec VPN - Link Selection, Outgoing VPN Link Selection on a gateway with multiple external interfaces

SmartView Monitor is a GUI client that is supported in R81. It allows you to monitor the network and security performance of your Security Gateways and devices5. You can use it to view real-time statistics, alerts, logs, reports, and graphs6. The other GUI clients are not supported in R81 because:

A. SmartProvisioning was replaced by SmartLSM in R80.20 and later versions7. SmartLSM is a unified solution for managing large-scale deployments of Security Gateways8.

B. SmartView Tracker was replaced by SmartLog in R80 and later versions9. SmartLog is a powerful log analysis tool that enables fast and easy access to log data from multiple Security Gateways10.

D. SmartLog is not a GUI client, but a web-based application that runs on the Security Management Server or Log Server10. You can access it from any web browser or from SmartConsole.

References: SmartView Monitor R81 Help, SmartView Monitor R81 Administration Guide, What’s New in Check Point R80.20, SmartLSM R81 Help, What’s New in Check Point R80, SmartLog R81 Help