Pass the Cisco CCNP Data Center 350-601 Questions and answers with ExamsMirror

Refer to the exhibit. An engineer must configure infrastructure monitoring in a Cisco UCS domain to monitor traffic on the Cisco fabric interconnect A and Cisco fabric interconnect B port links connected to Cisco MDS switches SW1 and SW2. The monitored traffic must be sent to Cisco Intersight at 20 Gbps for further analysis. Which command must be run on a UCS device after the create eth-mon-eession EthMonitor1/0 command is run?

An engineer must authenticate OSPF on interfaces of me Cisco Nexus 9000 Senes Switch so mat

eth1/1 uses clear text password

etht'2 uses encrypted md5 password

Drag and drop the commands from the bottom onto the boxes in the code to complete me configuration Not all commands are used.

Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.

A QoS policy on Cisco UCS must meet mese requirements:

No-drop class must be configured

Jumbo frames must be enabled without fragmentation.

Which configuration must be implemented to meet mese conditions?

What is the effect of enabling Skip Validation in the Cisco UCS Auto Install process?

Refer to the exhibit. An engineer implements a VXLAN pod deployment with the vPC. During an upgrade of switches in POD1. Leaf 102 starts to rejoin the vPC pair. Also, traffic to and from the Web Cluster becomes intermittent for five minutes. Which additional command must be applied on both switches to resolve this issue?

Refer to the exhibit An engineer must build the VXLAN for a new customer

BGP is configured for Layer 3 connectivity and is confirmed to work as

expected The deployment must meet these entena:

•All VNI IDs must contain the VLAN that they represent

•Multicast must be used to transport ARP messages between the pods

Drag and drop the code snippets from the bottom onto the boxes in the code to complete the remaining Layer 2 connectivity.

Not all code snippets are used.

Refer to the exhibit.

Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

An engineer must develop a Python script that generates an interface configuration JinJa template called port_config.j2 with values defined in a Python dictionary

called int_dict. The generated output must be written to a file called port.conf in the same directory as the Python script. Which line must be added to complete the script and send the

interface configuration generated to a Cisco Nexus switch using SSH?

Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?