Pass the Cisco CCNP Data Center 350-601 Questions and answers with ExamsMirror

What is a key feature of Cisco Intersight in the context of IJCS management?

Refer to the exhibit. Users report SAN traffic packet loss on a blade server that is managed by using Cisco UCS Manager. An engineer must implement a SPAN feature to an external Fibre Channel analyzer. Which configuration source in the TEST monitoring session must the engineer select?

An engineer is performing a configuration on a Cisco Nexus 5000 Series Switch. The requirement is for the current Fibre Channel IDs in VSAN 120 to be saved across reboots. The Cisco environment also must integrate with a third-party solution that requires persistent Fibre Channel IDs for the VSAN. The WWN of the Cisco switch must be 33:e8:00:05:30:00:16:df and its Fibre Channel ID 0x070128. Which command set meets these requirement?

An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted. Which command should be used to meet these requirements?

An engineer implements an environment with multiple traffic types on a consolidated I/O link between Cisco Nexus 9000 Series Switch and MDS 9000 Series Switch The configuration must meet these requirements:

The unified I/O link must support LAN and SAN traffic.

A single, multipurpose Ethernet transport must be used.

The configuration must discard MAC addresses that are not part of the current fabric.

The QoS markings must be preserved.

Which configuration set meets the requirements?

Refer to the exhibit An engineer must restrict users assigned to the sangroup role on the Cisco MDS 9000 Series Switch from issuing commands

on VSANs 15 to 20 Which command must the engineer run to achieve

this objective?

An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:

• vNIC and vHBA profiles

• Fan speed and power redundancy profile of UCS Manager

Which two roles must be assigned to a user to achieve this goal? (Choose two.)

A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities Which solution provides this information?

An engineer must configure monitoring on a Cisco MDS 9000 Series Switch for a critical interface prone to sporadic data traffic surges. A Remote Network Monitoring alarm must be configured to sample the number of incoming octets on the critical interface every 300 seconds and must be triggered if the traffic exceeds a certain threshold. Which command must be run?

An engineer must implement a set of changes in a Cisco Nexus 9000 Series Switch so that:

Which set of actions meets these requirements?

A)

B)

C)

D)