Pass the CompTIA Network+ N10-009 Questions and answers with ExamsMirror

The correct answer is Ad hoc because it allows wireless devices to communicate directly with one another without requiring a centralized access point or additional infrastructure. According to CompTIA Network+ (N10-009) objectives under wireless networking concepts, an ad hoc network (also known as an Independent Basic Service Set, or IBSS) enables peer-to-peer wireless communication.

This type of network is ideal for temporary or quick setups where only a small number of devices need to connect. In an ad hoc configuration, each device connects directly to others, making it simple and fast to deploy without requiring switches, routers, or wireless access points.

Spine and leaf (Option B) is a data center architecture designed for high scalability and redundancy, not small wireless setups. Point-to-point (Option C) refers to a direct connection between two devices only, which would not support five devices efficiently. Mesh (Option D) allows multiple nodes to interconnect and provide redundancy, but it is more complex and typically requires compatible infrastructure devices.

Therefore, for a quick setup with five wireless devices, an ad hoc network is the most appropriate choice.

RADIUS (Remote Authentication Dial-In User Service) is a networking protocol that provides centralized Authentication, Authorization, and Accounting (AAA) management for users who connect and use a network service. RADIUS is often used to manage access to wireless networks, enabling users to authenticate with their company credentials, ensuring secure access to the network.References: CompTIA Network+ study materials. ​

Port 443 is used by HTTPS (Hypertext Transfer Protocol Secure), a secure version of HTTP that uses SSL/TLS to encrypt the communication between a client and server. This ensures confidentiality and integrity of data in transit. The document states:

“Port 443 is the default port for HTTPS, which secures HTTP traffic using SSL/TLS, providing encryption and secure identification of web servers.”

Power over Ethernet (PoE) delivers power to devices such as VoIP phones over the same cables used for data. If the total power requirement of connected devices exceeds the PoE power budget of the switch or injector, some devices may not receive adequate power and could intermittently reboot. This issue would not affect the workstation, which is likely receiving power separately. References: CompTIA Network+ Exam Objectives and official study guides.

The correct answer is EOL discontinues the product but may offer support. According to CompTIA Network+ (N10-009) objectives related to lifecycle management and vendor support policies, End of Life (EOL) indicates that a product is no longer being manufactured or sold by the vendor. However, after EOL is declared, the vendor may continue to provide limited support, updates, or warranty services for a defined period.

In contrast, End of Support (EOS) means the vendor has stopped providing technical assistance, patches, firmware updates, and security fixes for the product. Once a product reaches EOS, organizations are responsible for maintaining it without vendor assistance, which can introduce operational and security risks.

Option B is incorrect because EOS does not typically convert support into a subscription model—it signifies the termination of support. Option C is incorrect because EOS applies to both hardware and software products. Option D is incorrect because warranty terms depend on vendor policy and are not guaranteed after EOL status.

Therefore, the key distinction is that EOL ends product sales, while EOS ends vendor support.

•AAAA records map domain names to IPv6 addresses, enabling proper resolution.

•PTR records (A) are for reverse DNS lookups.

•TXT records (B) store text-based information, not IP addresses.

•NS records (D) define authoritative name servers but don’t directly affect IPv6 resolution.

???? Reference: CompTIA Network+ N10-009 Official Documentation – DNS Configuration & IPv6.

If the three new employees can communicate with each other’s devices, that strongly suggests their local Layer 2/Layer 3 connectivity is working (same VLAN/subnet, switching is fine, and they have IP addressing that allows local communication). The fact that they cannot access company resources (often on other subnets, servers, or the internet via internal routing) points to a problem with how these new endpoints are being addressed or routed beyond their local segment.

The most likely shared root cause affecting only “new employees” is DHCP scope/pool configuration. If the DHCP pool is exhausted, mis-scoped, or handing out incorrect options (such as an incorrect default gateway, wrong subnet mask, or an address range tied to an isolated VLAN), users could still talk locally but fail to reach resources outside their subnet. Modifying the DHCP server pool (expanding the scope, correcting the scope network, or ensuring the correct options are assigned) would resolve this with minimal changes.

A gateway routing table issue would typically affect many users, not just three new ones. DNS misconfiguration on the router would more commonly cause name-resolution problems, not block all resource access (and wouldn’t be isolated to only new employees). A workstation firewall would not usually prevent access to “company resources” in a way that consistently affects three new devices while still allowing peer connectivity.

The correct answer is Test the theory, which aligns directly with the CompTIA Network+ N10-009 troubleshooting methodology. According to the official troubleshooting steps, once a problem has been identified and relevant information gathered, the next step is to establish a theory of probable cause and then test that theory to determine whether it is valid.

In this scenario, the engineer has already completed the problem identification phase by confirming that all users are experiencing latency and correlating the issue with the installation of a new switch. The engineer has also formed a theory: that a network loop caused by the lower bridge ID of the new switch may be impacting Spanning Tree Protocol (STP), resulting in congestion and latency. Because this theory has already been developed, the next logical and required step is to test the theory—for example, by reviewing STP states, temporarily disabling ports, or adjusting bridge priorities.

Implementing a solution would be premature without validating the theory, and verifying full system functionality occurs only after a fix has been applied. The Network+ objectives stress following a structured methodology to avoid unnecessary changes and minimize network disruption. Testing the theory ensures accuracy before corrective action is taken, reducing risk and downtime.

Single-mode fiber is best suited for long-distance communication, often exceeding 10 km (6.2 miles). It ' s immune to EMI and offers high bandwidth — making it the ideal choice for connecting buildings across a city.

Coaxial (A) and Twinaxial (B) are used for shorter distances and specific use cases (e.g., storage or legacy systems).

Cat 5 (D) is limited to 100 meters and is not suitable for city-level interconnects.

✅ For long-distance, high-speed, and reliable communication between buildings, Single-mode fiber is the professional choice.

A computer network diagram with many boxes and text AI-generated content may be incorrect.

VXLAN (Virtual Extensible LAN) encapsulates Ethernet frames inside UDP packets, increasing packet size. This can lead to fragmentation and performance degradation unless Jumbo Frames are enabled.

Breakdown of Options:

A. 802.1Q tagging – VLAN tagging enables segmentation but does not address fragmentation issues.

B. Spanning tree – STP prevents loops but does not improve performance for VXLAN traffic.

C. Link aggregation – LACP combines links for higher bandwidth but does not prevent fragmentation.

D. Jumbo frames – Correct answer. Enabling Jumbo Frames allows larger packet sizes, reducing fragmentation and improving VXLAN performance.

Comprehensive and Detailed Explanation (paraphrased, aligned to N10-009):

HTTPS is HTTP encapsulated in TLS (the successor to SSL), which provides confidentiality, integrity, and server authentication for web traffic.

A. SSH secures remote shell and tunnels, not HTTPS.

C. SCADA refers to industrial control systems, not a transport security protocol.

D. RADIUS is an AAA protocol for authentication/authorization/accounting, not the web encryption layer.

References (CompTIA Network+ N10-009):

Domain: Network Standards, Protocols, and Implementations — Web protocols (HTTP/HTTPS), TLS handshake and purpose, encryption in transit.

802.11ax, also known as Wi-Fi 6, is designed for high-density environments and improves device saturation and coverage compared to previous standards.

802.11ac: While it offers high throughput, it is not optimized for high-density environments as effectively as 802.11ax.

802.11ax (Wi-Fi 6): Introduces features like OFDMA, MU-MIMO, and BSS Coloring, which enhance performance in crowded environments, reduce latency, and increase the number of devices that can be connected simultaneously.

802.11g and 802.11n: Older standards that do not offer the same level of efficiency or support for high device density as 802.11ax.

Network References:

CompTIA Network+ N10-007 Official Certification Guide: Covers the 802.11 standards and their capabilities.

Cisco Networking Academy: Provides training on Wi-Fi technologies and best practices for high-density deployments.

Network+ Certification All-in-One Exam Guide: Discusses the various 802.11 standards and their applications in different environments.

The correct answer is Question the user because the first step in the CompTIA Network+ (N10-009) troubleshooting methodology is to identify the problem. Identifying the problem involves gathering information, asking clarifying questions, determining if anything has changed, and establishing the scope of the issue.

Even though the user states they have “checked everything,” the administrator should not assume that all relevant troubleshooting steps were properly performed. The technician must ask specific questions such as: Are other users affected? Is the issue limited to certain websites? Are there any error messages? When did the issue start? Were there recent updates or configuration changes?

Only after gathering sufficient information should the administrator move to the next steps, such as establishing a theory of probable cause (Option B) or using divide-and-conquer methods (Option A). Documentation (Option D) occurs after resolving and verifying the issue.

Therefore, questioning the user to clearly define and scope the problem is the correct first action according to the structured troubleshooting process.