Pass the IASSC Lean Six Sigma Black Belt ICBB Questions and answers with ExamsMirror

A Lean Six Sigma project is attempting to reduce inventory days. The Process Capability will be monitored as part of the Control Phase to track the sustainability of the improvement.

Which distribution type is best used for performing the Capability Analysis?

An operator checks that all boxes being packed contain enough products to fill the box. However, each box getting filled has a different number of products in it. This is a Reproducibility problem, not a Repeatability problem.

What conclusion is most correct about the Experimental Design shown here with the response in the far right column?

Time is always the metric on the horizontal scale of a(n) ___________ Chart.

Fractional Factorial, ____________and Response Surface Method are types of planned experiments.

Accuracy can be assessed in several ways and a fairly accurate means of measurement is visual comparison.

Range Charts are the technique used to determine if Special Causes are occurring within the subgroups of the ______________.

One of the methods of testing a Measurement System is to have at least two people take multiple readings from the same instrument and of the same sample set to judge the Repeatability and Reproducibly. This approach is called a ______________ study.

Control Charts were developed by Dr. Shewhart to track data over time. To detect Special Cause variation the Control Charts use which of these?

A Factorial Experiment based on a Level 2 Design with 4 factors would require 16 runs to fully assess the interactions.