Pass the Cisco CCNA 200-301 Questions and answers with ExamsMirror

Which QoS traffic handling technique retains excess packets in a queue and reschedules these packets for later transmission when the configured maximum bandwidth has been surpassed?

Refer to the exhibit.

Which minimum configuration items are needed to enable Secure Shell version 2 access to R15?

A)

B)

C)

D)

Refer to the exhibit.

An engineer is configuring a new router on the network and applied this configuration. Which additional configuration allows the PC to obtain its IP address from a DHCP server?

Drag and drop the threat-mitigation techniques from the left onto the types of threat or attack they mitigate on the right.

Refer to the exhibit.

Web traffic is coming in from the WAN interface. Which route takes precedence when the router is processing traffic destined for the LAN network at 10 0.10.0/24?

What is one reason to implement LAG on a Cisco WLC?

Refer to the exhibit.

A company is configuring a failover plan and must implement the default routes in such a way that a floating static route will assume traffic forwarding when the primary link goes down. Which primary route configuration must be used?

Refer to the exhibit.

Host A sent a data frame destined for host D

What does the switch do when it receives the frame from host A?

An engineer must configure R1 for a new user account. The account must meet these requirements:

* It must be configured in the local database.

* The username is engineer.

* It must use the strongest password configurable. Which command must the engineer configure on the router?

Refer to the exhibit.

A static route must be configured on R14 to forward traffic for the 172 21 34 0/25 network that resides on R86 Which command must be used to fulfill the request?

Which protocol is used for secure remote CLI access?

Refer to the exhibit.

Users on existing VLAN 100 can reach sites on the Internet. Which action must the administrator take to establish connectivity to the Internet for users in VLAN 200?

Refer to the exhibit.

Which next-hop IP address does Routed use for packets destined to host 10 10.13.158?

Refer to the exhibit.

Traffic that is flowing over interface TenGigabitEthernet0/0 experiences slow transfer speeds. What is the reason for the issue?

Which type of network attack overwhelms the target server by sending multiple packets to a port until the half-open TCP resources of the target are exhausted?

Which characteristic differentiates the concept of authentication from authorization and accounting?

Refer to the exhibit.

Switch A is newly configured. All VLANs are present in the VLAN database. The IP phone and PC A on Gi0/1 must be configured for the appropriate VLANs to establish connectivity between the PCs. Which command set fulfills the requirement?

A)

B)

C)

D)

Drag and drop the Rapid PVST+ forwarding slate actions from the loft to the right. Not all actions are used.

Refer to the exhibit.

Which two commands when used together create port channel 10? (Choose two.)

Refer to the exhibit.

Which command configures OSPF on the point-to-point link between routers R1 and R2?

Which Layer 2 switch function encapsulates packets for different VLANs so that the packets traverse the same port and maintain traffic separation between the VLANs?

Refer to the exhibit.

Which switch becomes the root of a spanning tree for VLAN 20 if all li links are of equal speed?

Refer to the exhibit.

Which plan must be Implemented to ensure optimal QoS marking practices on this network?

What is the purpose of the ip address dhcp command?

Which action implements physical access control as part of the security program of an organization?

A network engineer is installing an IPv6-only capable device. The client has requested that the device IP address be reachable only from the internal network. Which type of IPv6 address must the engineer assign?

Refer to the exhibit.

Which network prefix was learned via EIGRP?

Refer to the exhibit.

What is a reason for poor performance on the network interface?

A Cisco engineer is configuring a factory-default router with these three passwords:

• The user EXEC password for console access is p4ssw0rd1

• The user EXEC password for Telnet access is s3cr3t2

• The password for privileged EXEC mode is pnv4t3p4ss Which command sequence must the engineer configured

A)

B)

C)

D)

A network engineer must configure two new subnets using the address block 10 70 128 0/19 to meet these requirements:

• The first subnet must support 24 hosts

• The second subnet must support 472 hosts

• Both subnets must use the longest subnet mask possible from the address block

Which two configurations must be used to configure the new subnets and meet a requirement to use the first available address in each subnet for the router interfaces? (Choose two )

Refer to the exhibit.

Users need to connect to the wireless network with IEEE 802. 11r-compatible devices. The connection must be maintained as users travel between floors or to other areas in the building What must be the configuration of the connection?

Refer to the exhibit.

Which configuration allows routers R14 and R86 to form an OSPFv2 adjacency while acting as a central point for exchanging OSPF information between routers?

A)

B)

C)

D)

What is a function of an endpoint on a network?

Refer to the exhibit.

How should the configuration be updated to allow PC1 and PC2 access to the Internet?

OSPF must be configured between routers R1 and R2. Which OSPF configuration must be applied to router R1 to avoid a DR/BDR election?

Refer to the exhibit.

Which route must be configured on R1 so that OSPF routing is used when OSPF is up. but the server is still reachable when OSPF goes down?

Which type of IPv6 address is similar to a unicast address but is assigned to multiple devices on the same network at the same time?

Refer to the exhibit.

Which command must be issued to enable a floating static default route on router A?

Refer to the exhibit.

Packets received by the router from BGP enter via a serial interface at 209 165 201 1 Each route is present within the routing table Which interface is used to forward traffic with a destination IP of 10.1.1.19?

What is the function of the controller in a software-defined network?

Refer to the exhibit.

Site A was recently connected to site B over a new single-mode fiber path. Users at site A report Intermittent connectivity Issues with applications hosted at site B. What is the reason for the problem?

Refer to the exhibit.

The following must be considered:

• SW1 is fully configured for all traffic

• The SW4 and SW9 links to SW1 have been configured

• The SW4 interface Gi0/1 and Gi0/0 on SW9 have been configured

• The remaining switches have had all VLANs adde d to their VLAN database

Which configuration establishes a successful ping from PC2 to PC7 without interruption to traffic flow between other PCs?

A)

B)

C)

D)

Refer to the exhibit.

An engineer built a new L2 LACP EtherChannel between SW1 and SW2 and executed these show commands to verify the work. Which additional task allows the two switches to establish an LACP port channel?

A network engineer must implement an IPv6 configuration on the vlan 2000 interface to create a routable locally-unique unicast address that is blocked from being advertised to the internet. Which configuration must the engineer apply?

Refer to the exhibit. During initial configuration testing, the Windows workstation PC1 cannot connect with the 172.16.2.0/24 network.

Which set of actions corrects the configuration?

Refer to the exhibit. The loopback IP of R3 has been learned via the two interfaces on R1. R1 is configured with a reference bandwidth of 10 Gbps. Based on the metric calculations, which next hop IP would be used for outgoing routing?

Which type of protocol is VRRP?

How is Al used to identify issues within network traffic?

How does automation leverage data models to reduce the operational complexity of a managed network?

Refer to the exhibit. What is the administrative distance for the advertised prefix that includes the host IP address 10.30.0.1?