Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the Cisco CCNA 200-301 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam 200-301 Premium Access

View all detail and faqs for the 200-301 exam

Go to Exam

797 Students Passed

92% Average Score

91% Same Questions

Viewing page 7 out of 8 pages

Viewing questions 301-350 out of questions

Questions # 301:

Which design element is a best practice when deploying an 802.11b wireless infrastructure?

Options:

disabling TPC so that access points can negotiate signal levels with their attached wireless devices.

setting the maximum data rate to 54 Mbps on the Cisco Wireless LAN Controller

allocating nonoverlapping channels to access points that are in close physical proximity to one another

configuring access points to provide clients with a maximum of 5 Mbps

Questions # 302:

R1 has learned route 10.10.10.0/24 via numerous routing protocols. Which route is installed?

Options:

route with the lowest cost

route with the next hop that has the highest IP

route with the shortest prefix length

route with the lowest administrative distance

Questions # 303:

When a WPA2-PSK WLAN is configured in the wireless LAN Controller, what is the minimum number of characters that in ASCll format?

Options:

Questions # 304:

An engineer observes high usage on the 2.4GHz channels and lower usage on the 5GHz channels. What must be configured to allow clients to preferentially use 5GH2 access points?

Options:

Re- Anchor Roamed Clients

11ac MU-MIMO

OEAP Split Tunnel

Client Band Select

Questions # 305:

What are two reasons for an engineer to configure a floating state route? (Choose two)

Options:

to automatically route traffic on a secondary path when the primary path goes down

to route traffic differently based on the source IP of the packet

to enable fallback static routing when the dynamic routing protocol fails

to support load balancing via static routing

to control the return path of traffic that is sent from the router

Questions # 306:

Where does wireless authentication happen?

Options:

SSID

radio

band

Layer 2

Questions # 307:

Which protocol requires authentication to transfer a backup configuration file from a router to a remote server?

Options:

DTP

FTP

SMTP

TFTP

Questions # 308:

Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.

Question # 308

Options:

Questions # 309:

Refer to the exhibit.

Question # 309

If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1 120 command how does the router respond?

Options:

It ignores the new static route until the existing OSPF default route is removed

It immediately replaces the existing OSPF route in the routing table with the newly configured static route

It starts load-balancing traffic between the two default routes

It starts sending traffic without a specific matching entry in the routing table to GigabitEthernet0/1

Questions # 310:

What are two descriptions of three-tier network topologies? (Choose two)

Options:

The core and distribution layers perform the same functions

The access layer manages routing between devices in different domains

The network core is designed to maintain continuous connectivity when devices fail.

The core layer maintains wired connections for each host

The distribution layer runs Layer 2 and Layer 3 technologies

Questions # 311:

Which IPv6 address type provides communication between subnets and is unable to route on the Internet?

Options:

global unicast

unique local

link-local

multicast

Questions # 312:

Refer to the exhibit.

Question # 312

The New York router is configured with static routes pointing to the Atlanta and Washington sites. Which two tasks must be performed so that the Serial0/0/0 interfaces on the Atlanta and Washington routers can reach one another?

(Choose two.)

Options:

Configure the ipv6 route 2012::/126 2023::1 command on the Washington router.

Configure the ipv6 route 2023::/126 2012::1 command on the Atlanta router.

Configure the Ipv6 route 2012::/126 s0/0/0 command on the Atlanta router.

Configure the ipv6 route 2023::/126 2012::2 command on the Atlanta router.

Configure the ipv6 route 2012::/126 2023::2 command on the Washington router.

Questions # 313:

Which unified access point mode continues to serve wireless clients after losing connectivity to the Cisco Wireless LAN Controller?

Options:

sniffer

mesh

flexconnect

local

Questions # 314:

What is the expected outcome when an EUI-64 address is generated?

Options:

The seventh bit of the original MAC address of the interface is inverted

The interface ID is configured as a random 64-bit value

The characters FE80 are inserted at the beginning of the MAC address of the interface

The MAC address of the interface is used as the interface ID without modification

Questions # 315:

Refer to the exhibit.

Question # 315

An engineer deploys a topology in which R1 obtains its IP configuration from DHCP. If

the switch and DHCP server configurations are complete and correct. Which two sets of commands must be configured on R1 and R2 to complete the task? (Choose two)

Options:

R1(config)# interface fa0/0

R1(config-if)# ip helper-address 198.51.100.100

R2(config)# interface gi0/0

R2(config-if)# ip helper-address 198.51.100.100

R1(config)# interface fa0/0

R1(config-if)# ip address dhcp

R1(config-if)# no shutdown

R2(config)# interface gi0/0

R2(config-if)# ip address dhcp

R1(config)# interface fa0/0

R1(config-if)# ip helper-address 192.0.2.2

Questions # 316:

Where does a switch maintain DHCP snooping information?

Options:

in the MAC address table

in the CAM table

in the binding database

in the frame forwarding database

Questions # 317:

An office has 8 floors with approximately 30-40 users per floor What command must be configured on the router Switched Virtual Interface to use address space efficiently?

Options:

ip address 192.168.0.0 255.255.0.0

ip address 192.168.0.0 255.255.254.0

ip address 192.168.0.0 255.255.255.128

ip address 192.168.0.0 255.255.255.224

Questions # 318:

Which JSON data type is an unordered set of attribute- value pairs?

Options:

array

string

object

Boolean

Questions # 319:

Refer to the exhibit.

Question # 319

Router R1 Fa0/0 is unable ping router R3 Fa0/1.

Which action must be taken in router R1 to help resolve the configuration issue?

Options:

set the default network as 20.20.20.0/24

set the default gateway as 20.20.20.2

configure a static route with Fa0/1 as the egress interface to reach the 20.20.20.0/24 network

configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network

Questions # 320:

Which two protocols must be disabled to increase security for management connections to a Wireless LAN Controller? (Choose two.)

Questions # 321:

Which technology can prevent client devices from arbitrarily connecting to the network without state remediation?

Options:

802.1x

IP Source Guard

MAC Authentication Bypass

802.11n

Questions # 322:

Refer to the exhibit.

Question # 322

Drag and drop the networking parameters from the left onto the correct values on the right.

Question # 322

Options:

Questions # 323:

An engineer requires a scratch interface to actively attempt to establish a trunk link with a neighbor switch. What command must be configured?

Options:

switchport mode trunk

switchport mode dynamic desirable

switchport mode dynamic auto

switchport nonegotiate

Questions # 324:

How does WPA3 improve security?

Options:

It uses SAE for authentication.

It uses a 4-way handshake for authentication.

It uses RC4 for encryption.

It uses TKIP for encryption.

Questions # 325:

A Cisco IP phone receive untagged data traffic from an attached PC. Which action is taken by the phone?

Options:

It allows the traffic to pass through unchanged

It drops the traffic

It tags the traffic with the default VLAN

It tags the traffic with the native VLAN

Questions # 326:

Refer to the exhibit.

Question # 326

An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.

Question # 326

Options:

Questions # 327:

What does an SDN controller use as a communication protocol to relay forwarding changes to a southbound API?

Options:

OpenFlow

Java

REST

XML

Questions # 328:

What Is the path for traffic sent from one user workstation to another workstation on a separate switch In a Ihree-lter architecture model?

Options:

access - core - distribution - access

access - distribution - distribution - access

access - core - access

access -distribution - core - distribution - access

Questions # 329:

Which type of organization should use a collapsed-core architecture?

Options:

large and requires a flexible, scalable network design

large and must minimize downtime when hardware fails

small and needs to reduce networking costs currently

small but is expected to grow dramatically in the near future

Questions # 330:

Which configuration is needed to generate an RSA key for SSH on a router?

Options:

Configure the version of SSH

Configure VTY access.

Create a user with a password.

Assign a DNS domain name

Questions # 331:

Refer to the exhibit.

Question # 331

A packet is being sent across router R1 to host 172.163.3.14. To which destination does the router send the packet?

Options:

207.165.200.246 via Serial0/1/0

207.165.200.254 via Serial0/0/1

207.165.200.254 via Serial0/0/0

207.165.200.250 via Serial/0/0/0

Questions # 332:

Refer to the exhibit.

Question # 332

An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC-2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN Which configuration meets these requirements?

Question # 332

Options:

Option A

Option B

Option C

Option D

Questions # 333:

An engineer configured an OSPF neighbor as a designated router. Which state verifies the designated router is in the proper mode?

Options:

Exchange

2-way

Full

Init

Questions # 334:

Which networking function occurs on the data plane?

Options:

forwarding remote client/server traffic

facilitates spanning-tree elections

processing inbound SSH management traffic

sending and receiving OSPF Hello packets

Questions # 335:

Which plane is centralized by an SDN controller?

Options:

management-plane

control-plane

data-plane

services-plane

Questions # 336:

An engineer needs to configure LLDP to send the port description time length value (TLV). What command sequence must be implemented?

Options:

switch(config-line)#IIdp port-description

switch(config)#IIdp port-description

switch(config-if)#IIdp port-description

switch#IIdp port-description

Questions # 337:

A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?

Options:

ip route 10.10.1.0 255.255.255.240 10.10.255.1

ip route 10.10.1.16 255.255.255.252 10.10.255.1

ip route 10.10.1.20 255.255.255.252 10.10.255.1

ip route 10.10.1.20 255.255.255.254 10.10.255.1

Questions # 338:

Refer to me exhibit.

Question # 338

Which action is taken by the router when a packet is sourced from 10.10.10.2 and destined for 10.10.10.16?

Options:

It uses a route that is similar to the destination address

It discards the packets.

It floods packets to all learned next hops.

It Queues the packets waiting for the route to be learned.

Questions # 339:

When a WLAN with WPA2 PSK is configured in the Wireless LAN Controller GUI which format is supported?

Options:

Unicode

base64

decimal

ASCII

Questions # 340:

When OSPF learns multiple paths to a network, how does it select a route?

Options:

It multiple the active K value by 256 to calculate the route with the lowest metric.

For each existing interface, it adds the metric from the source router to the destination to calculate the route with the lowest bandwidth.

It divides a reference bandwidth of 100 Mbps by the actual bandwidth of the existing interface to calculate the router with the lowest cost.

It count the number of hops between the source router and the destination to determine the router with the lowest metric

Questions # 341:

What is a capability of FTP in network management operations?

Options:

encrypts data before sending between data resources

devices are directly connected and use UDP to pass file information

uses separate control and data connections to move files between server and client

offers proprietary support at the session layer when transferring data

Questions # 342:

Which WPA3 enhancement protects against hackers viewing traffic on the Wi-Fi network?

Options:

TKiP encryption

AES encryption

scrambled encryption key

SAE encryption

Questions # 343:

What are two reasons that cause late collisions to increment on an Ethernet interface? (Choose two)

Options:

when the sending device waits 15 seconds before sending the frame again

when the cable length limits are exceeded

when one side of the connection is configured for half-duplex

when Carrier Sense Multiple Access/Collision Detection is used

when a collision occurs after the 32nd byte of a frame has been transmitted

Questions # 344:

Refer to the exhibit.

Question # 344

Which two commands were used to create port channel 10? (Choose two )

Question # 344

Options:

Option A

Option B

Option C

Option D

Option E

Questions # 345:

What are two benefits of using the PortFast feature? (Choose two )

Options:

Enabled interfaces are automatically placed in listening state

Enabled interfaces come up and move to the forwarding state immediately

Enabled interfaces never generate topology change notifications.

Enabled interfaces that move to the learning state generate switch topology change notifications

Enabled interfaces wait 50 seconds before they move to the forwarding state

Questions # 346:

Refer to the exhibit.

Question # 346

Which command configures a floating static route to provide a backup to the primary link?

Options:

ip route 0.0.0.0 0.0.0.0 209.165.202.131

ip route 209.165.201.0 255.255.255.224 209.165.202.130

ip route 0.0.0.0 0.0.0.0 209.165.200.224

ip route 209.165.200.224 255.255.255.224 209.165.202.129 254

Questions # 347:

How do traditional campus device management and Cisco DNA Center device management differ in regards to deployment?

Options:

Cisco DNA Center device management can deploy a network more quickly than traditional campus device management

Traditional campus device management allows a network to scale more quickly than with Cisco DNA Center device management

Cisco DNA Center device management can be implemented at a lower cost than most traditional campus device management options

Traditional campus device management schemes can typically deploy patches and updates more quickly than Cisco DNA Center device management

Questions # 348:

What is the benefit of configuring PortFast on an interface?

Options:

After the cable is connected, the interface uses the fastest speed setting available for that cable type

After the cable is connected, the interface is available faster to send and receive user data

The frames entering the interface are marked with higher priority and then processed faster by a switch.

Real-time voice and video frames entering the interface are processed faster

Questions # 349:

Refer to the exhibit.

Question # 349

Router R1 is running three different routing protocols. Which route characteristic is used by the router to forward the packet that it receives for destination IP 172.16.32.1?