Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror
Pass the Cisco CCNA 200-301 Questions and answers with ExamsMirror
Exam 200-301 Premium Access
View all detail and faqs for the 200-301 exam
797 Students Passed
92% Average Score
91% Same Questions
Drag and drop the REST API call method for HTTP from the left onto the action they perform on the right.
Drag and drop each characteristic of device-management technologies from the left onto the deployment type on the right.
Which capability does TFTP provide?
What is a reason why an administrator would choose to implement an automated network management approach?
An administrator must use the password complexity not manufacturer-name command to prevent users from adding “cisco” as a password. Which command must be issued before this command?
What is the primary purpose of private address space?
What differentiates the Cisco OfficeExtend AP mode from FlexConnect AP mode?
Which WLC interface provides out-of-band management in the Cisco Unified Wireless Network Architecture?
Refer to the exhibit.
Routers R1 and R2 are configured with RIP as the dynamic routing protocol. A network engineer must configure R1 with a floating static route to serve as a backup route to network 192.168.23. Which command must the engineer configure on R1?
Refer to the exhibit.
Which switch becomes the root bridge?
A)
B)
C)
D)
Which command configures the Cisco WLC to prevent a serial session with the WLC CLI from being automatical togged out?
Refer to the exhibit.
Which interface is chosen to forward traffic to the host at 192.168.0.55?
A switch is a forwarding a frame out of an interfaces except the interface that received the frame. What is the technical term for this process?
Refer to the exhibit.
The given Windows PC is requesting the IP address of the host at www.cisco.com. To which IP address is the request sent?
A WLC sends alarms about a rogue AP, and the network administrator verifies that the alarms are caused by a legitimate autonomous AP.
Refer to the exhibit.
Which next-hop IP address has the least desirable metric when sourced from R1?
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Refer to the exhibit.
In which structure does the word "warning" directly reside?
Refer to the exhibit. This ACL is configured to allow client access only to HTTP, HTTPS, and DNS services via UDP. The new administrator wants to add TCP access to the DNS service. Which configuration updates the ACL efficiently?
How does machine learning improve the detection of unauthorized network access?
Why implement VRRP?
Drag and drop the network topology architecture types from the left onto the corresponding function on the right. Not all architecture types are used.
What are two reasons lo configure PortFast on a switch port attached to an end host? (Choose two.)
Drag and drop the TCP and UDP characteristics from the lett onto the corresponding protocols on the right.
A user configured OSPF and advertised the Gigabit Ethernet interface in OSPF. By default, to which type of OSPF network does this interface belong?
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
What determines the sequence in which materials are planned during the material requirements planning (MRP) run?
Which part of the HTTP request is used in REST API basic authentication to carry credentials?
Refer to the exhibit. Drag and drop the subnet masks from the left onto the corresponding subnets on the right. Not all subnet masks used.
Refer to the exhibit.
Which configuration establishes a Layer 2 LACP EtherChannel when applied to both switches?
An engineer is configuring SSH version 2 exclusively on the R1 router. What is the minimum configuration required to permit remote management using the cryptographic protocol?
Refer to the exhibit. An engineer is asked to confère router R1 so that it forms an OSPF single-area neighbor relationship with R2. Which command sequence must be implemented to configure the router?
Drag and drop the common functions from the left onto the cofresponding network topology architecture layer on the right. Not all common functions are used.
A network engineer is upgrading a small data center to host several new applications, including server backups that are expected to account for up to 90% of the bandwidth during peak times. The data center connects to the MPLS network provider via a primary circuit and a secondary circuit. How does the engineer inexpensively update the data center to avoid saturation of the primary circuit by traffic associated with the backups?
What are two characteristics of a small office / home office connection environment? (Choose two.)
Refer to the exhibit.
After configuring a new static route on the CPE. the engineer entered this series of commands to verify that the new configuration is operating normally When is the static default route installed into the routing table?
Refer to the exhibit. Which interface does a packet take to reach the destination address of 10.10.10.147?
Which interface enables communication between a program on the controller and a program on the networking devices?
Refer to the exhibit.
An access list is created to deny Telnet access from host PC-1 to RTR-1 and allow access from all other hosts A Telnet attempt from PC-2 gives this message:"% Connection refused by remote host" Without allowing Telnet access from PC-1, which action must be taken to permit the traffic?
R1 has learned route 192.168.12.0/24 via IS-IS. OSPF, RIP. and Internal EIGRP Under normal operating conditions, which routing protocol is installed in the routing table?
Which technology must be implemented to configure network device monitoring with the highest security?
Which action does the router take as rt forwards a packet through the network?
A corporate office uses four floors in a building
• Floor 1 has 24 users
• Floor 2 has 29 users
• Floor 3 has 28 users
•Floor 4 has 22 users
Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration?
An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?
Refer to the exhibit.
What does router R1 use as its OSPF router-ID?
A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received interface counter increments?
Refer to the exhibit.
The default-information originate command is configured under the R1 OSPF configuration After testing workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet Which action corrects the configuration issue?
Refer to the exhibit.
The entire contents of the MAC address table are shown. Sales-4 sends a data frame to Sales-1.
What does the switch do as it receives the frame from Sales-4?
What are two characteristics of a controller-based network? (Choose two)
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
TOP CODES
Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.