Pass the CompTIA A+ 220-1201 Questions and answers with ExamsMirror

Clock frequency is one of the most significant factors influencing a computer system’s processing performance. According to CompTIA Core 1 (220-1201) CPU and performance objectives, clock speed—measured in gigahertz (GHz)—determines how many instruction cycles a processor can perform per second.

Higher clock frequencies generally result in faster execution of instructions, leading to improved performance in both single-threaded and multi-threaded workloads. While modern CPUs also rely on core count, cache size, and architecture efficiency, clock frequency remains a primary metric for evaluating raw processing speed.

An integrated GPU affects graphics performance rather than overall CPU processing capability. Power connectors ensure proper electrical delivery but do not directly improve processing performance. The voltage regulator module (VRM) stabilizes and regulates power supplied to the CPU but does not itself increase processing speed.

CompTIA expects candidates to recognize clock frequency as a key determinant of CPU performance when upgrading or comparing processors.

When an application fails to install on a smartphone despite being supported by the OS and device type, CompTIA A+ stresses that the most common cause is insufficient storage. Mobile devices require not only space for the app itself but also additional temporary space for the installation process, cached data, and updates. If internal storage is nearly full, the app store will display installation errors—even if the OS and hardware meet requirements.

Battery health has no impact on app installation. A SIM card is unrelated to installing local applications—it only affects cellular connectivity. Processor architecture issues would have been caught during compatibility checking, but the technician already verified the device supports the application.

Therefore, after confirming compatibility, the next logical step is to check available storage space. If storage is low, deleting unused apps, clearing cached data, or transferring media to cloud storage or an SD card typically resolves the installation issue.

Thus, Option A: Storage is the correct answer.

Single-mode fiber (as well as multi-mode fiber) transmits data using beams of light, allowing for high-speed data transfer over flexible fiber-optic cables.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.1 – Networking media:

“Fiber optic cables transmit data using light. Single-mode fiber is used for long-distance, high-speed communication.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Media

CompTIA Exam Objectives 220-1101, Domain 2.1

============

Power over Ethernet (PoE) is specifically designed to power network devices without requiring a separate electrical outlet. According to CompTIA Core 1 (220-1201) networking hardware objectives, PoE allows both data and electrical power to be delivered over a single Ethernet cable from a PoE-capable switch or injector to the connected device.

PoE is commonly used for devices such as wireless access points, IP cameras, VoIP phones, and access control systems, especially in locations where installing electrical outlets is difficult, expensive, or impractical. This makes PoE an ideal solution for flexible and scalable network deployments.

WWAN (Wireless Wide Area Network) provides cellular-based network connectivity but does not supply power to devices. An ONT (Optical Network Terminal) converts fiber signals to Ethernet and requires its own power source. NFC (Near Field Communication) is a short-range wireless technology used for authentication and data exchange, not for powering network devices.

CompTIA highlights PoE as a key networking technology that simplifies installations by reducing cabling requirements and eliminating the need for local power outlets.

CompTIA A+ repeatedly highlights that modern motherboards require two power connectors:

The 24-pin ATX main power connector

The 4-pin or 8-pin CPU power connector (EPS connector)

If the CPU power connector is missing, the system will not POST, even though other components appear to have power. This is a very common mistake after replacing PSUs and is specifically noted in CompTIA materials as a frequent cause of “no boot” scenarios.

Insufficient wattage usually causes instability, not a total failure to start. RAM is unrelated to powering on. Redundant PSUs are used in servers, not gaming PCs.

Thus, the missing CPU power connector is the correct diagnosis and matches A+ hardware troubleshooting guidelines.

PoE (Power over Ethernet) allows both data and electrical power to be delivered over the same Ethernet cable. A PoE injector adds power to Ethernet cables for devices that need it.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Networking hardware:

“Power over Ethernet (PoE) technology and PoE injectors enable both power and data transmission to compatible network devices like access points and IP cameras.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Network Hardware

CompTIA Exam Objectives 220-1101, Domain 2.2

============

Comprehensive and Detailed Explanation

To enable file sharing across different operating systems, CompTIA A+ emphasizes the use of:

✔ SMB (Server Message Block)

The primary file-sharing protocol used by Windows.

Also supported on macOS and Linux (via Samba).

Allows shared folders, printers, and network browsing.

✔ FTP (File Transfer Protocol)

A cross-platform file transfer service supported by all major OSs.

Commonly used to upload/download files between systems of different types.

These two protocols are explicitly listed in CompTIA objectives under network protocols and file services.

Why the other options are incorrect

A. NTP – Time synchronization, not file sharing.

C. IMAP – Email protocol, not related to file sharing.

E. ROP – Not a file-sharing protocol (Return-Oriented Programming = security exploit).

F. LDAP – Directory service for authentication, not file sharing.

Final Answer: B, D

An IP address beginning with 169.254.x.x is an APIPA address (Automatic Private IP Addressing). CompTIA A+ explains that APIPA is assigned automatically by Windows when the NIC cannot reach a DHCP server. This indicates the laptop requested an IP lease but never received one.

APIPA addresses allow only local subnet communication and cannot access the internet, because no default gateway, DNS, or valid subnet configuration is provided. Since all other employees can access the internet, the DHCP server is functioning generally, but it is not delivering an address to this specific laptop—possibly due to cable issues, Wi-Fi authentication failure, DHCP scope exhaustion, or NIC misconfiguration.

A subnet mask misconfiguration (A) would still show a normal IP, not APIPA. IPv6-only configuration (C) would not produce a 169.254 address. An outdated NIC driver (B) could cause network instability but does not directly generate APIPA.

Thus, the root cause is that the DHCP server did not assign an IP address.

Abulging tablet casingis a classic sign of aswollen lithium-ion battery, often caused by age, overheating, or overcharging. This is adangerous condition, as swollen batteries can rupture or catch fire. It also explains why the tablet only works when plugged in the battery is no longer holding a charge.

Option A:Power supply issues wouldn’t cause physical bulging.

Option B:A bad charge port wouldn’t cause screen damage or physical distortion.

Option D:A broken screen could cause display issues, but not the bulging chassis.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 1.4: Given a scenario, configure settings and use cases for laptops and mobile devices.

===========

Application virtualization allows legacy software to run in a virtualized environment while the operating system remains current. It isolates the application from the OS, ensuring compatibility without downgrading the OS.

Why Not A (Shared resources): This relates to resource sharing, not application compatibility.

Why Not B (System sandbox): Sandboxes isolate applications for security testing, not compatibility.

Why Not C (Test development): Test environments are used for development, not running legacy applications.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 4.2, virtualization concepts​.