Pass the CompTIA A+ 220-1201 Questions and answers with ExamsMirror

Comprehensive and Detailed Explanation From Exact Extract:

MDM (Mobile Device Management) enforces security policies, such as encryption, remote wipe, and access control. It could have remotely wiped the device or locked it down to prevent data theft.

Assigning astatic IP addressto a network printer ensures it always retains the same address, allowing users and print servers to consistently reach it even after a reboot or network refresh.

Option B (Private address):Refers to address ranges (e.g., 192.168.x.x) doesn ' t guarantee address persistence.

Option C (Wi-Fi):Is a connection method, not a method of IP assignment.

Option D (Dynamic addressing):Via DHCP, which can change over time unless reservations are made (less reliable).

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.4: Given a scenario, install and configure printers.

RG11 coaxial cable with quad shielding is designed to handle large volumes of internet traffic, providing excellent resistance to interference and high bandwidth capacity.

Why Not A (USB 3.1): USB 3.1 is used for connecting peripherals, not for high-volume internet traffic.

Why Not C (SATA3.0): SATA is used for internal data storage connections, not for network traffic.

Why Not D (Unshielded plenum RJ45): While RJ45 cables are commonly used, unshielded cables are prone to interference and are not ideal for high-volume traffic.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 3.1, cable types and their characteristics​.

Intermittent display issues, such as a screen flashing on and off, are most commonly caused by a loose or faulty video cable connection. If the power cable is confirmed secure, the next logical step is to check the video (data) cable between the monitor and the computer.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 4.1 – Troubleshoot common hardware problems:

" Common video issues include intermittent display or loss of picture. The most likely causes are a loose or faulty video cable or connector. Check all cable connections before troubleshooting internal components. "

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Troubleshooting Hardware Problems

CompTIA Exam Objectives 220-1101, Domain 4.1

============

A blinking orange light typically indicates a failed hard drive in the RAID array. In RAID 1 (mirroring), you can replace the failed drive and rebuild the array without data loss.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.4 – RAID configuration and troubleshooting:

" In the event of a hard drive failure in RAID 1, replace the failed disk and allow the array to rebuild using the remaining mirrored disk. "

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: RAID and Storage

CompTIA Exam Objectives 220-1101, Domain 3.4

============

Comprehensive and Detailed Explanation (100–150+ Words):

CompTIA A+ stresses that printers must use static IP addresses to remain consistently reachable on a LAN. When using DHCP, the printer ' s IP address may change, causing laptops to lose access. By assigning a static IP within the same subnet, the printer becomes a stable, discoverable network resource for all laptops.

Using dynamic IPs for the laptops is perfectly acceptable in SOHO environments, because clients don’t require permanent IPs. Assigning public IPs (Option B) is incorrect and unsafe. APIPA (169.254.x.x) does not route and cannot reach the internet or a standard printer. Using dynamic ISP-assigned IPs for all devices (Option D) is also incorrect because ISP routers typically give only one public IP, not multiple internal ones.

Therefore, to ensure the printer is always reachable, the correct configuration is: DHCP for laptops, static IP for printer a best practice detailed in CompTIA’s networking and SOHO setup guidelines.

A Type 2 hypervisor is defined as a hypervisor that runs on top of a host operating system, rather than directly on the system’s hardware. According to CompTIA Core 1 (220-1201) virtualization concepts, Type 2 hypervisors are also referred to as hosted hypervisors and are commonly used in desktop, lab, and testing environments.

In this model, the host operating system (such as Windows, macOS, or Linux) is installed first, and the hypervisor runs as an application within that OS. The hypervisor then manages virtual machines by requesting hardware resources through the host OS. Examples of Type 2 hypervisors include VirtualBox, VMware Workstation, and Parallels Desktop.

Option B describes a Type 1 (bare-metal) hypervisor, which runs directly on the hardware without a host OS. Type 1 hypervisors are typically used in enterprise environments and offer higher performance and isolation. Option A is unrelated to virtualization, as firewall functionality controls network traffic. Option D is incorrect because hypervisors do not inherently increase CPU capabilities; they allocate existing resources.

CompTIA emphasizes understanding the distinction between Type 1 and Type 2 hypervisors, particularly that Type 2 hypervisors rely on a host operating system, making option C the correct answer.

Reasoning: A cable tester capable of testing Power over Ethernet (PoE) functionality can verify whether the switchport is providing the required power to the phone. This tool measures both the presence of data and the voltage or wattage being provided through the Ethernet cable.

This is the most effective way to confirm that PoE is available on the port.

Why the Other Options Are Incorrect:

A. Network tap:

A network tap is primarily used to monitor network traffic, not to test for PoE availability. It cannot verify if power is being supplied through the Ethernet cable.

C. Loopback plug:

A loopback plug is used to test the functionality of a network port by creating a loop for transmitted and received signals. It does not measure or verify PoE availability.

D. Toner probe:

A toner probe is used for tracing and identifying network cables. It cannot test for PoE functionality.

Practical Example:

A PoE phone might not turn on due to a misconfigured or faulty switchport. Using a cable tester capable of measuring PoE would help the technician determine if the switchport is supplying sufficient power to the phone.

CompTIA A+ Exam Objective Alignment:

Objective 2.1: Identify common networking hardware and tools, including PoE-enabled devices and cable testers.

A PoE injector is used to add power to an Ethernet cable, enabling the cable to deliver both power and data. This is crucial when connecting to PoE-enabled devices like IP cameras or wireless access points that are far from power outlets.

A. Run the maintenance application:

Most modern printers include a built-in maintenance application that can calibrate the print heads and correct alignment issues. Running this tool is the first step to address misalignment.

Incorrect Options:

B. Clean the rollers: Cleaning rollers is typically done to resolve paper feed or jamming issues, not alignment problems.

C. Upgrade the firmware: While updating firmware is beneficial for performance improvements, it is not the first step for fixing alignment.

D. Reinstall the drivers: Misaligned printing is usually hardware-related, not a driver issue.

Key Takeaway: The maintenance application should be run first to resolve alignment issues in a newly installed printer.

Choppy or unintelligible audio is typically caused by issues with the microphone, such as poor quality, hardware defects, or misconfiguration.

Why Not A (Webcam): The webcam handles video, not audio.

Why Not B (Digitizer): A digitizer relates to touchscreens, not audio.

Why Not C (Inverter): Inverters manage power for displays, not audio.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 3.6, audio troubleshooting​.

A WWAN card provides cellular wide-area network connectivity (such as LTE or 5G) for a laptop, allowing it to access mobile data networks similar to a smartphone. To authenticate to a cellular carrier and identify the subscriber account, WWAN devices typically use a SIM (Subscriber Identity Module) or an embedded SIM. The SIM contains carrier subscription information and security credentials used during registration on the cellular network. Without a valid SIM or eSIM profile, the WWAN radio may be present, but it cannot complete carrier authentication and will not provide cellular data service.

The other options are different wireless technologies that are not the defining requirement for WWAN service. Wi-Fi is WLAN connectivity, usually provided by a separate Wi-Fi adapter. Bluetooth is a short-range personal area networking technology for peripherals and tethering. NFC is very short-range communication used mainly for tap-to-pair or payments. Therefore, the technology a built-in WWAN card supports in this context is SIM.

The appropriate network type for this scenario is a Local Area Network (LAN), which is designed for small, localized networks, such as within a single building or room. LANs are ideal for gaming because they provide high-speed, low-latency connections.

Option A (SAN): Incorrect. A Storage Area Network is used for data storage, not for gaming or general networking.

Option B (MAN): Incorrect. A Metropolitan Area Network covers a city or campus, far exceeding the scope needed for a gaming setup in a single room.

Option D (PAN): Incorrect. A Personal Area Network is designed for a single user, such as Bluetooth devices, and would not support multiple devices connecting to a game server.

The first consideration for a desktop CPU upgrade is the socket type, because the processor must be physically and electrically compatible with the motherboard. In CompTIA A+ Core 1 hardware terms, CPUs are designed for specific sockets (for example, Intel LGA or AMD AM-series), and a mismatch means the CPU simply cannot be installed. Even within the same brand, different generations may use different sockets, and the motherboard’s chipset and BIOS/UEFI must also support the selected CPU model. If the socket is wrong, factors like core count, frequency, and integrated graphics become irrelevant because the system will not POST or function.

After confirming socket compatibility, the technician would typically evaluate other constraints such as BIOS/UEFI update requirements, power and cooling (TDP and heatsink/fan capability), and RAM compatibility supported by the platform. Only then do performance-related preferences like core count (multitasking), bus/clock characteristics, or whether an integrated GPU is needed (if no discrete video card is present) become meaningful selection criteria. Therefore, the correct first consideration is the motherboard socket type.

Comprehensive and Detailed Explanation (From CompTIA A+ 220-1201 Concepts):

A consistent Wi-Fi SSID across all APs allows users to roam throughout the office while maintaining access to local resources without reconnecting manually.

CompTIA Core 1 Study Guide Concept Reference:

Wireless networking configuration

SSID broadcast and roaming

WLAN infrastructure

The study guide explains that a common SSID enables seamless roaming and uninterrupted access to network resources.