Pass the CWNP CWDP Wi-Fi Design CWDP-304 Questions and answers with ExamsMirror

Centralized control functions, such as key management and distribution, RRM, and load balancing will no longer be supported.

The router between the APs and the controller must be made aware of the APs as forwarding client STAs.

APs that were designed for a centralized forwarding model may not support all features in distributed forwarding mode.

All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit power arbiter for other APs in the ESS.

It provides clients with a temporary IP address on a restricted VLAN until 802.1X authentication is completed. Then the client receives its

long-term IP address.

It provides IP address bindings for specific network nodes that require long-term IP address assignments. WLAN controllers are configured

to use Option 43 to receive long-term IP address leases that are centrally managed with DHCP.

It supports vendor-specific IP address attributes for node discovery purposes. APs use Option 43 with vendor class identifiers to obtain the

IP address of a centralized WLAN controller.

It integrates a DHCP server with AAA servers and user databases to dynamically assign IP addresses to client devices. During 802.1X, the

AAA server uses

Advise the stakeholder that WLAN performance requirements will not be met and a new design process will be needed to meet the

requirements.

Leave it as it is and allow automatic channel management to correct any issues.

Increase the output power on all APs by 6 dB immediately.

Remove all external antennas and use only the internal antennas to reduce multipath.

Cat-5

Cat-6

Cat-5e

Cat-6a

Always use paints with metallic dye in them to prevent potential RF propagation impact.

Painting APs will significantly reduce the output power.

Painting APs may void the product manufacturer's warranty.

Most AP models for indoor environments come in a variety of form factors and colors. Painting is never recommended.

Vertically polarized omni

60° yagi

Parabolic dish

100° sector

Horizontally polarized omni

Associated with the VLAN on which they are connected.

Associated with the native VLAN of the WLAN controller.

Associated with VLAN 1, the default VLAN for new APs

Associated with a non-routable VLAN until the MAC address of the AP is removed from the controller's MAC filter

Support staff and end-users

CEOs and other executives

Guests and CEOs

WLAN designer and WLAN implemented

The WLAN controller will place the user priority (UP) value in the QoS Control field of the 802.11 frame header before passing it to the

lightweight AP.

The WLAN controller does not mark 802.11 frames with priority values only the APs can do this.

The WLAN controller does not mark the 802.11 frames with priority values only the Layer 3 switches can do this.

The WLAN controller does not mark the 802.11 frames with priority values only the Layer 3 routers can do this.

EAP-FAST

EAP-TTLS

EAP-TLS

PEAP