Pre-Summer Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Home
CWNP
CWDP Wi-Fi Design
CWDP-304
Certified Wireless Design Professional Questions and Answers

Pass the CWNP CWDP Wi-Fi Design CWDP-304 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam CWDP-304 Premium Access

View all detail and faqs for the CWDP-304 exam

Go to Exam

797 Students Passed

92% Average Score

95% Same Questions

Viewing page 4 out of 9 pages

Viewing questions 31-40 out of questions

Questions # 31:

Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional

client certificate use. Which EAP method would be the best fit for their requirement?

Options:

EAP-FAST

EAP-TTLS

EAP-TLS

LEAP

Answer

Questions # 32:

What is the DSCP Per Hop Behavior equivalent classification of the 802.11 AC_VO priority level?

Options:

AF31

CS3

Answer

Questions # 33:

Install technicians are deploying a multi-floor WLAN that you have designed They have finished the first floor and all APs on that floor are powered on and functioning No APs on any other floors have been deployed at this time You are considering performing a post-deployment site survey of the first floor immediately to validate proper implementation What statement is true about this site survey if you perform it?

Options:

It will miss any impact on the WLAN caused by APs on other floors

It will show you how the first floor will function after all other floors are deployed

It will not work because the controllers cannot function properly until all APs licensed lo the controller are operational

It will result in a complete set of data informing you how clients will function after the entire WLAN is implemented

Answer

Questions # 34:

You have been tasked with performing safety and operations training for outdoor bridge link installation. The antennas are to be installed on a 70-foot tower on one end and the roof top of an office building on the other end.

What might be required for the tower installation?

Response:

Options:

Hiring a certified tower installer.

Special antennas that avoid reflections on the tower poles.

APs that are designed to operate above 70 feet.

Special RF cables that will not create loss incurred by the metal tower construction.

Answer

Questions # 35:

Which definition correctly describes the "local MAC" variation of the centralized WLAN architecture?

Options:

All MAC functions are performed by the AP. A minimal subset of network control is offloaded to the WLAN controller along with

management and monitoring functions.

PHY functions are performed directly by the AP. MAC functions are divided almost equally between the WLAN controller and the AP,

according to the time sensitivity of the feature or service.

The AP provides the RF termination point for the WLAN, but performs very few of the WLAN functions or services. The WLAN controller

performs all MAC functions and the AP is very simple and lightweight.

All RF-, data-, and control-related WLAN functions are performed by the AP. APs coordinate network services with one another and are

managed by a WNMS,

Answer

Questions # 36:

You are planning for client devices in a WLAN that is be upgraded to 802.11ac. Which one of the following devices is more likely to have support for 3x3:3 radios and 256 QAM?

Response:

Options:

handheld scanner

tablet

laptop

USB 2.0 adapter

mobile phone

Answer

Questions # 37:

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.

What should you do to prevent this?

Response: