Pre-Summer Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Home
CWNP
CWDP Wi-Fi Design
CWDP-304
Certified Wireless Design Professional Questions and Answers

Pass the CWNP CWDP Wi-Fi Design CWDP-304 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam CWDP-304 Premium Access

View all detail and faqs for the CWDP-304 exam

Go to Exam

797 Students Passed

92% Average Score

95% Same Questions

Viewing page 8 out of 9 pages

Viewing questions 71-80 out of questions

Questions # 71:

Why does a frame transmitted at 1 Mbps have a greater usable range than the same frame transmitted at 54 Mbps?

Options:

Free space path loss causes greater signal dispersion for higher rate transmissions.

Receiver sensitivity requirements are lower for frames transmitted with less complex modulation and coding.

To improve reliability, 802.11 STAs increase transmit power as the signaling rate decreases.

Lower data rate RF transmissions travel at higher speeds and are less likely to experience collisions.

Answer

Questions # 72:

In most WLAN design tools, after defining project parameters or during the project creation wizard what action will you take before you can begin the actual design process?

Options:

Place APs

Define cabling

Import a floor plan

Define wall materials

Answer

Questions # 73:

In a large enterprise (5000+ wireless users), by what would NOT be a recommended method by which IP addresses and VLANs are assigned to

different clients associated to the same AP?

Options:

Each SSID is mapped to a static VLAN assignment

Upstream AAA servers dynamically assign VLANs to each user or group profile

Radio signal metrics (RSSI, SNR, etc.) of WLAN clients are triangulated for location-based VLAN assignment during association

Multiple VLAN pools are designated for an SSID and user IP addresses are selected in a round-robin fashion from the associated pools

Answer

Questions # 74:

When you see the SKINNY protocol in a post-install validation protocol capture, what does this indicate?

Options:

Secure FTP is in use

VoIP is used on the network

HTTPS is in use

Multicasting is used on the network

Answer

Questions # 75:

You are configuring an 802.11ac AP using manual channel planning. The design specification calls for the current AP to be placed on channel 56 in 5 GHz and to disable the 2.4 GHz radio.

For what could the 2.4 GHz radio be used if not standard AP operations?

Response:

Options:

PCI DSS encoding

Security monitoring

Bluetooth access

Controller-based channel assignment

Answer

Questions # 76:

Location technology (RTLS) can use which of the following methods?(Choose all that apply.)

Response:

Options:

Sound

802.11-capable laptops

Active RFID

Infrared

UHV

UWB

Passive RFID

Answer

A, B, C, D

Questions # 77:

An MSA commonly addresses at least which two legal categories?

Options:

Nondisclosure agreement

Hold harmless

Intellectual property protection

Indemnity clause

Answer

Questions # 78:

When analyzing published competitive tests by equipment vendors, what items are the tests usually lacking?(Choose all that apply.)

Response:

Options:

Client devices and configurations

Audit by a third party

Detailed test methodology

Detailed configurations of each vendor’s equipment

Answer

A, C, D

Questions # 79:

Given: As the wireless network administrator for XYZ Company, you are planning to upgrade your aging wireless network infrastructure, as well as

some clients, to support 802.11ac. In your research, you have discovered that your new wireless client devices and infrastructure are 802.11ac,

WMM, and WMM-PS certified by the Wi-Fi Alliance. Some of your existing client devices are 802.11a/b/g devices that do not support WMM.

Given this information, what scenario is possible when your company's employees begin using both types of client devices on the new WLAN?

Options:

All WMM-PS certified client devices will be prevented from utilizing WMM-PS features until all stations in use on the wireless medium are

WMM-PS certified.

The WLAN infrastructure will set the dozing times of the WMM-PS certified client devices based upon their WMM access category, while the

non-WMM-PS client devices will continue to use PS-Poll frames.

Performance and battery life will be inconsistent between WMM-PS and non-WMM-PS client devices when used with applications that

support WMM-PS.

WMM-PS enabled APs will allow both WMM-PS and non-WMM-PS stations to use the trigger-and-delivery mechanism, but WMM-PS stations wil

Answer

Questions # 80:

You are designing a WLAN and nave been asked to recommend a security solution for the network The organization requires that 802 1X/EAP be implemented, but they do not have a PKI and do not wish to deploy one They suggest that mostly Windows clients. Apple phones and Android phones will be used What do you recommend?