Pass the Huawei HCIP-Datacom H12-821_V1.0 Questions and answers with ExamsMirror

In a stateful inspection firewall, if the status detection mechanism is enabled, it tracks and validates the state of connections using the session table. If there is no session table and a SYN+ACK packet reaches the firewall, it checks the security policy. If the policy explicitly permits the packet, it will pass through the firewall, but no session table will be created without the initial SYN packet. The other options are either incorrect or misrepresent the behavior of stateful inspection ​.

Comprehensive and Detailed Step-by-Step Explanation:

BGP Origin Attribute Priority:

The Origin attribute determines the source of the route and affects the selection of the best path.

The priority order is as follows:

IGP (i): Highest priority. Routes injected using the network command.

EGP (e): Lower priority. Routes learned from the EGP protocol.

Incomplete (?): Lowest priority. Routes redistributed into BGP from other protocols.

Correct Option:

A: IGP > EGP > Incomplete is the correct order of priority.

In the given topology, the route from R4 to 10.0.2.2/32 traverses R3, which performs route leaking from Level-2 to Level-1. The cost is calculated as follows: R4 to R3 (40) + R3 to R2 (10) + R2 to the destination (30), resulting in a total cost of 80 ​.

Comprehensive and Detailed Step-by-Step Explanation:

HSB (Hot Standby Backup) Service:

HSB is used on WLAN controllers to back up critical information in real time to a backup device, ensuring service continuity in case of failures.

Backed-Up Information:

CAPWAP Tunnel Information (A): Essential for maintaining connections between APs and controllers.

AP Entries (C): Information about connected APs is backed up.

User Data Information (D): Includes client authentication and session details.

Incorrect Option:

DHCP Address Information (B): Not part of HSB's responsibilities, as DHCP is handled separately.