Pass the Huawei HCIP-Datacom H12-821_V1.0 Questions and answers with ExamsMirror

A is correct – Removing unused accounts helps minimize the risk surface.

B is false – Email is not a secure method for transferring sensitive information like passwords, even if encrypted.

C is correct – Unique administrator accounts help with accountability and tracking.

D is false – Long-term password validity reduces security. Passwords should be rotated regularly.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“To secure admin access, avoid account sharing, delete inactive users, and periodically update credentials through secure channels.”

(Chapter: Device Security – Section: Account Management)

Comprehensive and Detailed Step-by-Step Explanation:

OSPF State Machine:

OSPF adjacency progresses through several states: Down > Init > 2-Way > ExStart > Exchange > Loading > Full.

The 2-Way state indicates that routers have exchanged Hello packets but are not forming full adjacencies.

Possible Causes for Staying in the 2-Way State:

Hello Time Values Are Different (A): Mismatched Hello/Dead intervals prevent adjacency establishment.

Area IDs Are Different (B): OSPF routers must belong to the same area to establish adjacency.

Router IDs Conflict (C): While Router ID conflicts cause other issues, they do not result in the 2-Way state.

N-bit and E-bit Are the Same (D): Matching N-bit/E-bit values are normal and do not cause problems.

 ACL Modification

Named ACLs can be modified after their creation. Unlike numbered ACLs, named ACLs provide greater flexibility for editing individual rules without deleting the entire ACL.

Therefore, the statement is incorrect.

 HCIP-Datacom-Core Reference

The flexibility and editability of named ACLs are discussed in the ACL configuration sections​​.

Comprehensive and Detailed Step-by-Step Explanation:

ACL Capabilities:

ACLs are versatile tools that can match:

Data packets: Using IP addresses, protocols, ports, etc.

Routes: ACLs can be used in route filtering, matching both IP prefix length and mask length.

Correct Statement:

ACLs can match both the IP address prefix length and mask length in route filtering applications.

The Forwarding Information Base (FIB) is derived from the router's routing table and contains the exact forwarding entries used to route packets. It directly guides packet forwarding decisions by matching incoming packets with the correct output interface or next-hop address ​.

Comprehensive and Detailed Step-by-Step Explanation:

Default Next Hop Behavior in BGP:

Locally Originated Routes (A): The next hop is set to the advertising router's interface IP address.

Routes Received from EBGP (B): The next hop is not changed when these routes are advertised to IBGP peers. (This makes Option B false.)

Routes Advertised to EBGP (C): The next hop is set to the interface IP address of the advertising router.

Routes Advertised Between IBGP Peers (D): The next hop is not modified by default.

Incorrect Statement:

Option B is incorrect because the next hop of a non-labeled route received from an EBGP peer is not changed when it is advertised to IBGP peers.

Comprehensive and Detailed Step-by-Step Explanation:

1. How Firewalls Match Security Policies:

Firewalls use security policies to define rules for filtering traffic.

Each policy contains matching conditions (e.g., source IP, destination IP, protocol, etc.) and an action (e.g., permit or deny).

Traffic is evaluated against these policies in sequential order, and the first matching policy is applied.

2. Analysis of Each Statement:

Option A: Multiple values can be configured for a single matching condition, and the values are logically ANDed.

Incorrect.

Multiple values for a single matching condition (e.g., multiple source IPs) are logically ORed, not ANDed. For example, traffic from any of the specified source IPs matches the policy.

Option B: If a security policy contains multiple matching conditions, the relationship between them is AND.

Correct.

When a policy has multiple matching conditions (e.g., source IP AND destination IP AND protocol), all conditions must be met for the policy to match.

Option C: The system has a default security policy named default, where all matching conditions are any and the default action is permit.

Incorrect.

The default security policy typically denies all traffic unless explicitly permitted by user-defined policies.

Option D: When multiple security policy rules are configured, they are sorted in a list by configuration sequence by default. A security policy rule configured earlier is placed higher in the list and has a higher priority.

Correct.

Security policies are processed in sequential order based on their configuration sequence. Policies configured earlier have higher priority and are evaluated first.

3. Summary:

The correct statements are B and D.

 LSA Lifetime and Deletion

The LS Age field in the LSA header tracks the age of an LSA. When the LS Age reaches its maximum value (3600 seconds), the LSA is marked for deletion. This ensures old or stale LSAs are removed from the network to maintain accurate routing information.

 HCIP-Datacom-Core Reference

Detailed explanation of LS Age behavior and LSA deletion processes can be found in the OSPF LSDB and LSA sections​​.

The LS age field in OSPF LSAs (Link State Advertisements) is measured in seconds and increments over time in the Link State Database (LSDB). If the LS age reaches the LSRefreshTime (30 minutes), the router that originated the LSA must regenerate it to keep the LSA valid in the network. Options C and B are incorrect since LS age does not decrease, and only the originator regenerates LSAs ​.