Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with ExamsMirror

ASHRAE 62.1-2010 is the standard that an engineer should use when establishing minimum ventilation rates for a new mechanically ventilated space to earn Indoor Environmental Quality, Minimum Indoor Air Quality Performance. This is the standard referenced by the LEED v4 BD+C Reference Guide for this prerequisite. Local building code, International Mechanical Code 2012, and the ventilation code requiring the greatest volume of outside air are not acceptable alternatives for this prerequisite.

Interior paint must always be included in Materials and Resources credits. This is because interior paint is considered as a permanently installed product, which is defined by the LEED v4 Reference Guide for Building Design and Construction as "a product that is installed in a project permanently or semi-permanently, such that removal would require demolition or substantial renovation."1 Permanently installed products must be included in the calculations for the following Materials and Resources credits: Building Life-Cycle Impact Reduction, Building Product Disclosure and Optimization - Environmental Product Declarations, Building Product Disclosure and Optimization - Sourcing of Raw Materials, and Building Product Disclosure and Optimization - Material Ingredients.1 The other options are not always included in Materials and Resources credits. Faucets (option A) and fire suppression systems (option D) are considered as mechanical, electrical, and plumbing components, which are excluded from the scope of Materials and Resources credits unless they are specifically addressed by the credit requirements.1 Furniture (option B) is considered as a non-permanently installed product, which is optional to include in Materials and Resources credits, except for the Building Product Disclosure and Optimization - Material Ingredients credit, where furniture must be included if it is within the project scope.1 References: LEED v4 Reference Guide for Building Design and Construction, p. 5791; LEED v4 Reference Guide for Building Design and Construction, p. 5801; LEED v4 Reference Guide for Building Design and Construction, p. 5811; LEED v4 Reference Guide for Building Design and Construction, p. 5821; LEED v4 Reference Guide for Building Design and Construction, p. 5831

Pilot Credit registration is required when documenting a LEED Pilot credit. This is to ensure that the project team has access to the latest pilot credit language and requirements, and that USGBC can track the usage and feedback of the pilot credits. The other options are not required for documenting a pilot credit, although they may be helpful or applicable for other credits.

According to the LEED v4: Building Design + Construction Guide1, Option 2 of the Surrounding Density and Diverse Uses credit requires the project to be within walking distance of at least 10 diverse uses. The guide also states that “walking distance is defined as the distance that a pedestrian must travel between origins and destinations without obstruction, in a safe and comfortable environment on a continuous network of sidewalks, all weather-surface footpaths, crosswalks, or equivalent pedestrian facilities.” Therefore, the documentation must include walking routes from the project to each use to demonstrate that the distance requirement is met. References:

LEED v4: Building Design + Construction Guide

CI-v4.1 LTc2: Surrounding density and diverse uses | LEEDuser

A pilot credit identified by the LEED AP that is relevant to the project would be documented in LEED Online as an Innovation Credit. Pilot credits are proposed credits that are used to test and evaluate a strategy before they can be considered for incorporation into the LEED consensus process for approval by USGBC membership1. All other LEED v4 and v4.1 projects may register for pilot credits and pilot ACPs in LEED Online1.

Achievement of the Location and Transportation Credit, Surrounding Density and Diverse Uses may be affected by the move of the main entrance to the opposite side of the building. This is because the credit requires that the project be located within a minimum density area and within walking distance of diverse uses1. The walking distance is measured from a main functional entry of the project building to the diverse use entry1. If the main functional entry is moved, the distance to the diverse uses may change and affect the credit achievement. The other credits are not affected by the move of the main entrance, as they are based on the location of the project site, not the building entry. The Location and Transportation Credit, High-Priority Site rewards projects that are located on sites that are previously developed, infill, or adjacent to existing development2. The Location and Transportation Credit, Sensitive Land Protection rewards projects that are located on sites that do not contain sensitive land features such as prime farmland, wetlands, or habitats3. The Location and Transportation Credit, LEED for Neighborhood Development Location rewards projects that are located within the boundary of a LEED for Neighborhood Development certified plan4.

Detailed Explanation:

The Basis of Design (BOD) outlines the project design decisions and criteria, linking them to the Owner’s Project Requirements (OPR). LEED requires this documentation to demonstrate alignment between the owner’s goals and the building design, ensuring that sustainability objectives are met throughout the project lifecycle.

Water Efficiency (WE) Prerequisite: Indoor Water Use Reduction requires at least 20% savings over the baseline.

The project initially achieves 18% savings, which does not meet the prerequisite.

With the rainwater harvesting system, the total savings reach 28%, exceeding the minimum 20% prerequisite.

A 28% total reduction qualifies the project for two points under Water Efficiency (WE) Credit: Indoor Water Use Reduction.

The type of metering does not impact the points awarded for this credit.

(Source: Official LEED BD+C Reference Manual)

remediate sites already in decline

When a project team sustainably develops a project site, the design should aim to remediate sites already in decline, such as brownfields, degraded lands, or abandoned properties. By doing so, the project can restore the environmental quality, ecological functions, and social value of the site, as well as reduce the pressure on undeveloped lands and natural habitats. LEED offers credits for projects that choose to locate on and remediate sites already in decline, such as the Sustainable Sites Credit, Site Assessment and the Sustainable Sites Credit, Brownfields Remediation1.