Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with ExamsMirror

The LEED rating systems reference the standards of various organizations that are relevant to green building design, construction, and operation. The National Fire Protection Association (NFPA) is one of these organizations, and its standards cover topics such as fire safety, electrical safety, emergency power systems, and fire suppression systems. The LEED rating systems reference the NFPA standards in several credits and prerequisites, such as Minimum Energy Performance, Minimum Indoor Air Quality Performance, and Environmental Tobacco Smoke Control.

LEED rating system

LEED rating system selection guidance

What is LEED certification?

LEED - Wikipedia

ENERGY STAR Portfolio Manager is an online tool developed by the U.S. Environmental Protection Agency (EPA) that allows building owners and managers to measure and track the energy and water performance of their buildings, as well as benchmark their buildings against similar buildings nationwide. The tool uses a 1-100 ENERGY STAR score to rate the energy efficiency of a building relative to its peers, where a score of 50 represents medianperformance and a score of 75 or higher indicates top performance1 . References: LEED v4 Green Associate Candidate Handbook1, ENERGY STAR Portfolio Manager

Shielded light fixtures are designed to direct light downwards and prevent it from spilling over into areas where it’s not wanted, such as beyond the project boundary. This helps to prevent light trespass, which can be a form of pollution that disrupts ecosystems and human sleep patterns. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

An infill site within an existing neighborhood with substantial transit connectivity would maximize LEED points under Location and Transportation. An infill site is a site that has been previously developed or graded and is surrounded by existing development. An existing neighborhood is a geographic area with a variety of land uses, such as residential, commercial, educational, or recreational. Substantial transit connectivity means that the site has access to multiple modes of public transportation, such as buses, trains, light rail, or bicycles. The LEED Green Associate Candidate Handbook states that one of the intents of the Location and Transportation category is to “encourage development within existing communities and public transit infrastructure” [1, p. 12]. References: [LEED Green Associate Candidate Handbook], [Location and Transportation | U.S. Green Building Council]

Methane is a potent greenhouse gas that contributes to global warming and climate change. It is produced when organic waste decomposes anaerobically (without oxygen) in landfills1. Construction and demolition waste, which accounts for about a third of all solid waste generated in the world2, often contains a large amount of organic materials, such as wood, paper, and food waste1. Therefore, disposal of solid waste from building construction and operations in landfills has a substantial effect on methane emissions13. Incineration of solid waste also produces greenhouse gases, such as carbon dioxide, carbon monoxide, and hydrochloric acid, but at lower levels than landfilling45. Volatile organic compounds (VOCs) are not greenhouse gases, but they can react with other pollutants to form ozone, which is a greenhouse gas and a health hazard4.

According to the LEED v4 Minimum Program Requirements (MPRs), there is no minimum required number of occupants or full-time equivalents (FTEs) for which a building must be designed to be considered eligible to pursue certification1. However, the project must serve at least one FTE, which is based on an 8-hour day2. The other options are not part of the MPRs.

Minimum Program Requirements (MPRs) - U.S. Green Building Council1

LEED 101: MPRs (Minimum Program Requirements)2

Renewable Energy Certificates (RECs) are tradable, non-tangible energy commodities that represent the environmental attributes of one megawatt-hour of electricity generated from renewable sources, such as wind, solar, hydro, or biomass1. RECs can be purchased by anyone, regardless of their location or utility provider, to support the development of renewable energy and reduce their carbon footprint2. RECs can also help projects earn points for the LEED v4 Innovation credit for Green Power and Carbon Offsets,which requires the purchase of at least 50% of the total building energy use from renewable sources or offsets for a minimum of five years3.

Using Renewable Energy for LEED Certification

Renewable Energy Certificates For Green Building Explained

LEED v4, Renewable Energy, and Carbon Offsets

Adaptive reuse focuses on repurposing existing materials or elements to reduce construction waste and resource use. Reusing wood floors as wall panels exemplifies this principle, aligning with LEED credits under Materials and Resources​​.

Native species are plants that are adapted to the local climate and soil conditions, and therefore require less water and maintenance than non-native species. By maximizing the use of native species in the landscaping design, the project can reduce the need for potable water for irrigation and achieve the Outdoor Water Use Reduction credit under LEED v4 Water Efficiency category1.

LEED v4: Building Design + Construction Guide1, page 35

Renovating an existing building using recycled and salvaged building materials is an example of a life-cycle approach to development or design. A life-cycle approach is an approach that considers the environmental impacts of a product or a project from cradle to grave, or from extraction of raw materials to disposal or reuse. Renovating an existing building using recycled and salvaged building materials reduces the environmental impacts associated with new construction, such as land use change, resource depletion, energy consumption, waste generation, and greenhouse gas emissions.The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to “promote life-cycle assessment as a means of evaluating environmental impacts” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Life Cycle Assessment | U.S. Department of Energy]