Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with ExamsMirror

Access to quality transit is one of the criteria for the LEED v4 Location and Transportation category, which aims to reduce the environmental and human health impacts of transportation and promote sustainable site selection. By developing an urban site that is well-served by public transportation, the building owner can reduce the reliance on private vehicles, lower greenhouse gas emissions, and encourage alternative modes of travel123.

LEED v4: Building Design + Construction Guide1, page 25

LEED v4 Credit Tutorials: Location & Transportation (BD+C/ID+C)2

LEED v4 Q+A: Location and Transportation3

Chlorofluorocarbons (CFCs) are the class of refrigerants that contribute the most to ozone depletion potential (ODP). Ozone depletion potential is a measure of how much a substance can damage the ozone layer in the stratosphere, which protects life on Earth from harmful ultraviolet radiation. CFCs are synthetic chemicals that contain chlorine, fluorine, and carbon atoms. They were widely used as refrigerants, aerosol propellants, solvents, and foam blowing agents until they were phased out by the Montreal Protocol due to their high ODP. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving energy and atmosphere efficiency is to “eliminate chlorofluorocarbons (CFCs) in new building HVAC&R systems” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Ozone Depletion Potential | U.S. Environmental Protection Agency]

To maintain the LEED Green Associate credential, you must earn 30 continuing education hours every two years, with at least six of those hours being LEED specific. This requirement ensures that LEED Green Associates stay up-to-date with the latest developments in green building practices and LEED rating systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Energy use intensity (EUI) is a measure of energy use per unit of floor space. It is calculated by dividing the total energy consumed by the building in one year (measured in kilowatt-hours or kilo-British Thermal Units) by the total gross floor area of the building (measured in square feet or square meters). EUI is a useful metric for comparing the energy performance of different buildings or benchmarking against national averages. EUI can vary depending on building type, climate, occupancy, and other factors. Generally, a lower EUI indicates better energy efficiency and lower environmental impact. References: What is Energy Use Intensity (EUI)?2; Energy Use Intensity (EUI)3

LEED emphasizes:

“The integrative process... encourages the project team to find opportunities to achieve synergies throughout all building systems.”

The integrative approach involves energy and water analysis in early phases to drive sustainability.

Low-emitting materials, including partitions, are intended to:

“...reduce concentrations of chemical contaminants that can damage air quality, human health, productivity, and the environment.”

VOCs are a major indoor air contaminant addressed under the Indoor Environmental Quality category.

Renovating an existing building using recycled and salvaged building materials is an example of a life-cycle approach to development or design. A life-cycle approach is an approach that considers the environmental impacts of a product or a project from cradle to grave, or from extraction of raw materials to disposal or reuse. Renovating an existing building using recycled and salvaged building materials reduces the environmental impacts associated with new construction, such as land use change, resource depletion, energy consumption, waste generation, and greenhouse gas emissions.The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to “promote life-cycle assessment as a means of evaluating environmental impacts” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Life Cycle Assessment | U.S. Department of Energy]

Rainwater is the type of water that would be most useful for landscape irrigation when considering water conservation and water efficient landscaping. Rainwater is water that falls from the sky as precipitation, and it can be collected and stored in tanks, barrels, cisterns, or ponds for later use1. Rainwater is a renewable and free source of water that does not require any treatment or pumping, unlike potable water, which is water that is safe for human consumption and often comes from municipal sources2. Potable water is a scarce and valuable resource that should be conserved for drinking,cooking, and hygiene purposes, rather than for irrigation2. Clean water is a vague term that can refer to any water that is free of contaminants, but it does not necessarily mean that it is potable or suitable for irrigation3. Blackwater is water that contains human or animal waste, such as sewage or toilet water, and it poses a health and environmental risk if used for irrigation without proper treatment4. Therefore, rainwater is the best option for landscape irrigation, as it reduces the demand for potable water, lowers the utility bills, and benefits the plants and soil1.

Rainwater Harvesting for Landscape Irrigation

Potable Water

Clean Water

Blackwater

ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy that promotes energy efficiency. Products that earn the ENERGY STAR label meet strict criteria for energy efficiency and often for water efficiency as well, helping consumers save money on utility bills and protect the environment through energy-efficient products and practices. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Soft surfaces contribute to a comfortable acoustic environment by absorbing sound waves and reducing noise levels. This can include items such as carpets, upholstered furniture, and acoustic ceiling tiles. In contrast, hard surfaces (like wood cabinets, hollow metal doors, or glass partitions)can reflect sound waves and increase noise levels. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources