Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with ExamsMirror

Installing a bioswale is a design technique that should be used to help prevent stormwater damage to the building and surrounding site. A bioswale is a vegetated channel that conveys stormwater runoff while filtering pollutants, reducing peak flow rates, increasing infiltration, and providing habitat. A bioswale can help prevent stormwater damage by reducing erosion, flooding, sedimentation, and contamination of waterways. The other options are not design techniques that should be used to help prevent stormwater damage to the building and surrounding site. Directing runoff into a stream is a design technique that can cause stormwater damage by increasing the volume and velocity of water entering the stream, resulting in erosion, flooding, sedimentation, and contamination of the stream. Paving the site with high Solar Reflectance Index (SRI) material is a design technique that can reduce the heat island effect by reflecting more solar radiation than conventional paving materials, but it does not prevent stormwater damage as it does not reduce runoff or improve water quality. Paving the site with impervious material is a design technique that can cause stormwater damage by preventing infiltration and increasing runoff, resulting in erosion, flooding, sedimentation, and contamination of waterways. References: LEED Green Associate Candidate Handbook, page 32; USGBC [Sustainable Sites], page 4-5.

Reused materials are materials that have been used before and are incorporated into a new building without significant alteration1. They are different from recycled materials, which are materials that have been reprocessed into new products or materials2. Reused materials reduce the demand for new resources and the amount of waste sent to landfills1. LEED v4 encourages the use of reused materials by awarding points for Building Product Disclosure and Optimization - Sourcing of Raw Materials3.

Construction Waste Management | WBDG - Whole Building Design Guide1

Why plastic waste is an ideal building material - BBC Future2

LEED v4 | HPAC Engineering3

Retrocommissioning is a process applied to existing buildings to ensure that they continue to perform optimally for the current use. This process involves checking systems to see if they function as intended, making necessary repairs or improvements, and ensuring that building staff are trained in the operation and maintenance of systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Graywater refers to relatively clean wastewater from domestic activities such as washing dishes, laundry, and bathing. Water from lavatory faucets falls into this category. Graywater can be treated and reused for non-potable purposes such as toilet flushing or irrigation, which can help conserve water. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

To qualify for any level of LEED certification, a project must meet all the prerequisites and achieve a minimum number of points based on the ratingsystem and the certification level1. The prerequisites are mandatory requirements that must be met before a project can earn any points2. The points are awarded for achieving optional credits that demonstrate environmental performance and innovation2. The LEED rating system consists of five broad categories: Building Design and Construction (BD+C), Interior Designand Construction (ID+C), Building Operations and Maintenance (O+M), Neighborhood Development (ND), and Homes3. Each category has different adaptations for specific project types and scopes, such as Schools, Retail, Hospitality, Data Centers, Warehouses and Distribution Centers, Healthcare, etc3. Each adaptation has a different number of prerequisites and credits, and a different point scale for each certification level4. The certification levels are: Certified, Silver, Gold, and Platinum1. The minimumpoints required for each level vary depending on the rating system and the adaptation, but generally range from 40 to 80 points1.

In this question, the project has achieved 53 points and six of eight prerequisites. This means that the project has failed to meet two prerequisites, which are mandatory requirements. Therefore, the project does not qualify for any level of LEED certification, regardless of the rating system or the adaptation. The answer is A. None.

=

The 4 Levels of LEED Certification and How to Achieve Them

LEED credits, prerequisites and points: How are they different?

LEED rating system

LEED rating system selection

LEED certification is awarded based on the number of points a project earns across several categories of green building performance. The range of points required to maintain Gold level of LEED certification is 60-79, out of a possible 110 points. The other levels of LEED certification are: Certified (40-49 points), Silver (50-59points), and Platinum (80 or more points)13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3

LEED for Building Operations and Maintenance (O+M) is the rating system that applies to existing buildings and interior spaces that have been fully operational and occupied for at least one year1. It focuses on performance-oriented sustainable strategies and outcomes, such as energy efficiency, water conservation, waste management, indoor environmental quality, and transportation2. LEED O+M can help existing buildings reduce their environmental impacts and improve their operations1.

 2 LEED rating system | U.S. Green Building Council1 LEED for Existing Buildings (LEED-EB) | Harvard Energy & Facilities.

Prerequisites and credits are the two types of requirements that make up the LEED rating system. Prerequisites are the basic elements or strategies that must be included in any LEED certified project, regardless of the rating system or the level of certification1. Credits are the additional elements or strategies that can be included in a LEED project to achieve higher levels of performance and certification1. Credits are optional and have different point values depending on their environmental benefits and impacts2. Therefore, the correct answer is B. Prerequisites are mandatory and credits are optional.

LEED v4 | U.S. Green Building Council

LEED credit library | U.S. Green Building Council

 Life-cycle costing is an economic analysis method that considers all costs associated with an asset over its entire life cycle, from acquisition and installation to operation, maintenance, and disposal. In this case, the building manager is comparing the total costs of owning and operating two different boilers over their respective lifetimes. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Low cubicle partitions enhance the spread of daylight deeper into office spaces, improving natural lighting and reducing dependence on artificial lighting. This supports LEED credits under Indoor Environmental Quality, which aim to optimize daylight for better occupant health, productivity, and energy savings​​.